Product Details:
|
Rotation: | Clockwise Or Counterclockwise | Fuel: | +85267220981 |
---|---|---|---|
Mounting Type: | Flange Mount | Skype: | Sensenhenhao |
Drive Mode: | 6-250m3 | Products Name: | Rexroth Hydraulic Piston Pump |
Speed Range: | 1500-2600 Rpm | Displacement: | 28cc |
Power Source: | USB | Delivery Date: | 5 Days |
Highlight: | A10VSO140DRG/31R-PPA12N00,Hydraulic piston pump A10VSO71DFR1/31L-VPA12N00 |
A10VSO71DFR1/31L-VPA12N00 A10VSO100DRG/31R-VPA12N00 A10VSO100DRG/31L-PPA12N00
A10VSO100DRG/31L-VPA12N00 A10VSO140DRG/31R-PPA12N00 Hydraulic piston pump imported from Germany by Rexroth
Rexroth A10VSO hydraulic pump |
1. What are the possible causes and solutions for insufficient or no oil output from the hydraulic pump? |
• Reason: |
Excessive resistance in the oil suction pipeline (such as clogged oil filter, low oil tank level, or air leakage in the inlet pipe). |
Internal leakage of the pump (scratches on the oil distribution plate, poor sealing, sand holes, etc.). |
The inclination angle of the inclined plate is too small and the displacement is insufficient. |
Motor reversal (requires adjustment of phase sequence). |
• Solution: |
Clean the oil filter, add oil to the normal liquid level, and check the sealing of the pipeline. |
Replace worn parts (such as plungers, oil distribution plates) or grind mating surfaces. |
Adjust the variable piston to increase the inclination angle of the inclined plate. |
2. How to adjust if there is still traffic output at the median level? |
Reason: Deviation, looseness, or wear of the control mechanism (such as wear of the inclined plate ear shaft). |
Solution: Reset the controller, tighten or replace damaged parts, and check the angle holding force. |
How to troubleshoot the high vibration and noise during pump operation? |
• Mechanical reasons: |
The pump and motor shaft are not concentric, the coupling is damaged, or the bolts are loose. |
Wear of bearings or variable head bearings (dry friction or impurities in the oil during start-up). |
• Hydraulic reasons: |
The oil inlet pipe is too thin, the oil filter is clogged, or the oil viscosity is too high. |
• Solution: |
Reinstall and replace worn parts. |
Select appropriate oil to ensure smooth fuel tank design and piping. |
What are the causes and solutions for overheating of the pump body? |
• Reason: |
Mechanical friction (such as improper clearance between moving parts) or liquid friction (high-pressure oil leakage converted into thermal energy). |
Filter blockage leads to excessive back pressure in the return oil. |
• Solution: |
Adjust the gap and increase the capacity of the cooler or fuel tank. |
Clean or replace the filter. |
How to solve the problem of oil leakage? |
• Common oil leakage points: |
Damaged spindle oil seal, internal leakage (high oil seal pressure), loose external pipeline or aging sealing gasket. |
• Solution: |
Replace the oil seal or defective shaft, check the size of the oil drain pipe, and tighten the joint. |
What are the key points of daily maintenance? |
• Oil management: |
Maintain oil temperature at 25-60 ℃, cleanliness level ≥ 8, and regularly test oil quality. |
• Regular inspection: |
Conduct a comprehensive inspection of seals, filters, and mechanical components every 6 months. |
After running for 3000 hours, it is necessary to check the status of the oil replenishment pump daily. |
Before starting: Ensure that the pump is filled with oil to avoid dry friction. |
How to adjust abnormal pressure (too high/too low)? |
• Low pressure: Check for pipeline leaks, overflow valve faults, or cylinder block distribution plate leaks. |
Excessive pressure: Adjust the overflow valve, check the directional valve or return oil pipeline. |
------ |
precautions |
Installation requirements: The concentricity between the pump shaft and the motor shaft should be less than 0.05mm, and the suction height should not exceed 500mm. |
• Spare parts replacement: It is recommended to use original seals and wear-resistant components to ensure compatibility. |
R988075531 Rexroth plunger pump Rexroth variable displacement pump A10VSNO 63 DRS/32+PQ INCLUDING |
R98804557 Rexroth plunger pump Rexroth variable displacement pump A10VSO100DRS/32+SEMIP+Q+VA (300BAR) INCLUD |
R988045578 Rexroth plunger pump Rexroth variable displacement pump A10VSO140DRS/32+SEMIP+Q+VA (300BAR) INCLUD |
R988045579 Rexroth oil pump A10VSO37DFR1/31+PQ+VA (300BAR) INCLUDING |
R988045573 Rexroth oil pump A10VSO37DFR1/31+SEMIP+Q+VA (300BAR) INCLUD |
R988045574 Rexroth injection molding oil pump A10VSO45DFR1/32+SEMIP+Q+VA (300BAR) INCLUD |
R988045580 Rexroth injection molding oil pump A10VSO45DRS/32+PQ+VA (300BAR) INCLUDING |
R988045581 Rexroth injection molding oil pump A10VSO58DRS/32+PQ+VA (300BAR) INCLUDING |
R988045575 Rexroth injection molding oil pump A10VSO58DRS/32+SEMIP+Q+VA (300BAR) INCLUD |
R988075534 Rexroth injection molding oil pump AL A10VSO100DRS/32+PQ INCLUDING |
R988075535 Rexroth injection molding oil pump AL A10VSO140DRS/32+PQ INCLUDING |
R988075491 Bosch Rexroth plunger pump injection molding machine hydraulic pump AL A10VSO37DFR1/31+PQ INCLUDING |
R988075530 Bosch Rexroth plunger pump injection molding machine hydraulic pump AL A10VSO45DRS/32+PQ INCLUDING |
Bosch REXROTH Rexroth plunger variable displacement pump A10VS018DR/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger variable displacement pump A10VSO18DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth piston variable displacement pump A10VSO18DFR1/31R-PPB12N00 |
Bosch REXROTH Rexroth piston variable displacement pump A10VSO18DFR1/32R-VPB12N00 |
Bosch REXROTH Rexroth plunger variable displacement pump A10VG18HD1/10L-NSC16N003E |
Bosch REXROTH Rexroth plunger variable displacement pump A10VSO18DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger variable displacement pump A10V028DR/31R-PSC12N00 |
Bosch REXROTH Rexroth plunger variable displacement pump A10VS028DR/31R-PPA12N00 |
Bosch REXROTH Rexroth piston variable displacement pump A10VSO28DR/32R-VPB121N00 |
Bosch REXROTH Rexroth plunger variable displacement pump A10VSO28DFR/31R-PSA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO28DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO28DFR1/32R-VPB12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO28DRF1/31R-PSA12N00 |
Bosch REXROTH Rexroth plunger pump E-A10VSO28DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO28DR/31R-PSC12N00 |
Bosch REXROTH Rexroth plunger pump A10V028DR/31R-PSC62K01 |
Bosch REXROTH Rexroth plunger pump A10V028DFR1/31R-PSC62N00 |
Bosch REXROTH Rexroth plunger pump A10VS028DR/31L/PPA12G20+1PF2G2 |
Bosch REXROTH Rexroth plunger pump A10V028DFR/31L-PSC12K01+ |
Bosch REXROTH Rexroth plunger pump A10VSO45DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO45DFR1/32R-VPB12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO45DR/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO45DR/31R-PPA12K25 |
Bosch REXROTH Rexroth plunger pump A10VSO45DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VSO58DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VS045DFR1/31RPPA12NOO |
Bosch REXROTH Rexroth plunger pump E-A10VSO45DFR1/31R-PPA12N00 |
Bosch REXROTH Rexroth plunger pump A10VS045DFR/31R-PPA12NOO-SO32 |
Bosch REXROTH Rexroth plunger pump A10VS045DR/31R-PPA12N00 |
A10VS045DR/52R-PC12N00 |
A10V045DFR1/31R-PSC62K02 |
A10VSO45DFR1/31R-PPA12N00 |
A10VS045DR/31RPPB12-NDD |
A10VO45DFR1/31R-PSC62K02 |
A10VSO71DFR1/32R-VPB22U99 |
A10VSO71DFR1/31R-PPA12N00 |
A10VSO71DFR1/32R-VPB12N00 |
A10VSO71DFR1/31R-PPA12KB5 |
A10VSO71DFR/31R-PSC62K07 |
A10VO71DFRI/34 PSC6402-S0225 |
A10VSO71FR1/31R-PPA12N00 |
A10VSO71DFR1/31R-PPB12NOO |
E-A10VSO71DFR1/31R-PPA12N00 |
A10VO71DFR1/31RPSC62K07 |
A10VSO71DFR/31R-PPA12KB3 |
A10VS071DR/31R-PPA12N00 |
A10VS071DFR/31R-PPA12N00 |
A10VS071DFR1/31R-PPA12N00 |
A10VSO71DFR1/31R-PPA12N00 |
A10VSO71DFR1/32R-VPB22U99 |
EA10VSO71DR/31R-PPA12N00 |
A10VS0100DR/31R-PPA12N00 |
A10VS0100DR/32R-VPB22U99 |
A10VSO100DFR1/32R-VPB12N00 |
A10VSO100DFR1/31R-PPA12K |
A10VSO100DFR1/31R-PPA12KB3 |
EA10VSO100PFR1/31R-PPA12N00 |
FAQ;
What are the available displacement sizes?
The A10VSO series offers displacements from 10 to 140 cc/rev, categorized into:
• 31/32 series: 18–140 cc/rev (common sizes: 28, 45, 71, 100, 140).
• 52 series: 10 cc/rev (limited models).
3. How does the control mechanism work?
The pump supports multiple control types, indicated in the model code (e.g., DFR1):
• DR: Pressure control (remote).
• DFR: Pressure/flow control.
• DFLR: Pressure/flow/power control.
• FE/DFE: Electrohydraulic flow or pressure/flow control.
• ED: Electrohydraulic pressure control.
4. What are the installation requirements?
• Flange types: ISO 2-hole (A) or 4-hole (B) for larger sizes (e.g., 140 cc/rev).
• Shaft options: Keyed straight shaft (P), SAE splined shaft (S/R).
• Seals: NBR (standard) or FKM (fluorocarbon) for high-temperature fluids.
Contact Person: Mr. liyun
Tel: +8615280488899