|
Szczegóły Produktu:
|
| Moc: | Hydrauliczny | Teoria: | Pompa obrotowa |
|---|---|---|---|
| Typ uszczelnienia: | Uszczelka wargowa lub uszczelka mechaniczna | Data dostawy: | 5 dni |
| Typ wału: | Wspaniałe | Stosowanie: | Olej |
| Typ mocowania: | Kołnierz | Maksymalne ciśnienie: | 280 bar |
| Waga: | 12 kg | Znak firmowy: | MKS |
| Materiał mieszkaniowy: | lane żelazo | ||
| Podkreślić: | Rexroth proportional hydraulic valve,German made solenoid valve,Rexroth directional valve with warranty |
||
Rexroth German made solenoid valve
4WRZ10E1-50-7X/6EG24N9ETK4/M
4WREE10WA75-2X/G24K31/F1V
4WREE10WA50-2X/G24K31/F1V
| Processing & Customization | Yes |
|---|---|
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Order Rexroth's original seal kits, disassemble the valve, remove old seals, clean seal grooves, and install new seals (ensure compatibility with hydraulic fluid).
A: Air in the hydraulic system, fluctuating input signal, contaminated fluid, worn spool, or faulty position feedback sensor.
A: Operate the valve at low pressure with the actuator extended/retracted fully, opening bleeder valves (if available) until a steady fluid flow (without bubbles) is observed.
A: Excessive pressure drop, blocked drain port, insufficient fluid flow, or a faulty solenoid drawing excess current.
A: Measure the feedback signal (e.g., 4-20 mA) while shifting the spool manually; the signal should change proportionally to spool travel. No change indicates a faulty sensor.
Osoba kontaktowa: Mr. liyun
Tel: +8615280488899
