|
تفاصيل المنتج:
|
| قوة: | هيدروليكي | نظرية: | المضخة الدوارة |
|---|---|---|---|
| نوع الختم: | ختم الشفاه أو الختم الميكانيكي | تاريخ التسليم او الوصول: | 5 أيام |
| نوع رمح: | شريرة | الاستخدام: | زيت |
| نوع التركيب: | شفة | أقصى ضغط: | 280 بار |
| وزن: | 12 كجم | علامة تجارية: | MKs |
| المواد السكنية: | الحديد الزهر | ||
| إبراز: | Rexroth proportional hydraulic valve,German made solenoid valve,Rexroth directional valve with warranty,German made solenoid valve,Rexroth directional valve with warranty |
||
Rexroth German made solenoid valve
4WRZ10E1-50-7X/6EG24N9ETK4/M
4WREE10WA75-2X/G24K31/F1V
4WREE10WA50-2X/G24K31/F1V
| Processing & Customization | Yes |
|---|---|
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Order Rexroth's original seal kits, disassemble the valve, remove old seals, clean seal grooves, and install new seals (ensure compatibility with hydraulic fluid).
A: Air in the hydraulic system, fluctuating input signal, contaminated fluid, worn spool, or faulty position feedback sensor.
A: Operate the valve at low pressure with the actuator extended/retracted fully, opening bleeder valves (if available) until a steady fluid flow (without bubbles) is observed.
A: Excessive pressure drop, blocked drain port, insufficient fluid flow, or a faulty solenoid drawing excess current.
A: Measure the feedback signal (e.g., 4-20 mA) while shifting the spool manually; the signal should change proportionally to spool travel. No change indicates a faulty sensor.
اتصل شخص: Mr. liyun
الهاتف :: +8615280488899
