|
Λεπτομέρειες:
|
| Χρήση: | Λάδι, υδραυλική αντλία εμβόλου | Εφαρμογή: | Υδραυλικά συστήματα, υδραυλικές αντλίες, εκσκαφείς |
|---|---|---|---|
| Δομή: | Εμβολοφόρος Αντλία, Γραναζωτή Αντλία, Μονοβάθμια Αντλία, Υδραυλικές Αντλίες | Θεωρία: | Περιστροφική αντλία, αντλία αξονικής ροής, παλινδρομική αντλία, αντλία κενού, υδραυλικές αντλίες |
| Όνομα προϊόντος: | Υδραυλικές αντλίες, γνήσια υδραυλική γραναζωτή αντλία Rexroth, αντλία πτερυγίων vickers | Εγγύηση: | 1 έτος, 6 μήνες - 12 μήνες, 12 μήνες, ένα έτος, 3 μήνες ή 1 έτος |
| Κατάσταση: | 100% νέο, Νέα αντλία Rexroth, OEM νέο & πρωτότυπο, Oringal Νέο, ανθεκτικό | Ονομα: | Εμβολοφόρα αντλία Rexroth, αντλία 90R100, εξαρτήματα αντλίας εκσκαφέα υδραυλικές αντλίες αντλίας rex |
| Επισημαίνω: | Rexroth proportional hydraulic valve,electro-hydraulic directional valve,Rexroth Germany hydraulic valve |
||
4WRZ16E1-150-7X/6EG24N9ETK4/D3M
4WRZ16E1-150-7X/6EG24N9K4/M
4WRZ16E1-125-7X/6EG24N9EK4/M
Rexroth Germany made original proportional electro-hydraulic directional valve
| Selection Dimension | Specific Parameters/Options | Description |
|---|---|---|
| Model Designation | 4WRE | Basic model: Direct-acting proportional directional valve with electrical position feedback and no integrated electronics (OBE) |
| Integrated Electronics (OBE) | No Code | Standard configuration without integrated electronics; external amplifier required (to be ordered separately) |
| Nominal Size | 6 | Core size with component series 2X; mounting dimensions comply with Series 20-29 standards |
| Valve Core Type | 4/2 (2-position 4-way), 4/3 (3-position 4-way) | 4/3 type features spring-centered spool for automatic reset when de-energized; suitable for different oil circuit directional control needs |
| Rated Flow (Δp=10bar) | 4L/min (Code 04), 8L/min (Code 08), 16L/min (Code 16), 32L/min (Code 32) | Flow rates distinguished by corresponding codes; matched to hydraulic system flow requirements |
| Seal Material | V (FKM Fluororubber) | Default FKM material; compatible with mineral oil and other hydraulic fluids to ensure sealing performance |
| Power Supply Voltage | G24 (DC 24V) | Suitable for industrial standard DC power supply; meets proportional solenoid drive requirements |
| Electrical Interface | A1 (±10V Voltage Input), F1 (4-20mA Current Input) | Two interface options available; compatible with PLCs, computers, and other control signal sources |
| Electrical Connection | K4 (No Plug) | Plug compliant with DIN EN 175301-803 standard required (to be ordered separately) |
| Special Protection | J (Seawater-Resistant) | Only available for Size 6; suitable for marine-related or humid/corrosive working conditions |
| Mounting Standard | ISO 4401 | Panel mounting with standard mounting hole pattern; compatible with universal hydraulic system manifold layouts |
| Maximum Working Pressure | 315bar | Suitable for most medium-to-high pressure industrial hydraulic scenarios (e.g., hydraulic actuators in machine tools, automated production lines) |
Drain port leakage may result from excessive backpressure (exceeding 5 bar), worn seal rings, or internal spool damage. Ensure the drain line is unobstructed and check seal integrity.
Inconsistent flow can be due to contaminated hydraulic fluid (clogging the valve's orifices), fluctuating supply pressure, or a damaged proportional solenoid. Filter the fluid and inspect the solenoid for wear.
Overheating may occur from high pressure drops (exceeding the valve's rated ΔP), insufficient fluid flow through the valve, or a stuck spool. Reduce pressure drop and ensure adequate fluid circulation.
Noise can stem from cavitation (low fluid pressure), loose mounting bolts, or air in the hydraulic system. Bleed the system, check for leaks, and ensure the supply pressure is within the recommended range.
Routine inspections are recommended every 6 months (or 1000 operating hours), including checks for leakage, wiring damage, and fluid contamination.
Υπεύθυνος Επικοινωνίας: Mr. liyun
Τηλ.:: +8615280488899