|
Ürün ayrıntıları:
|
| Kullanım: | Yağ, hidrolik piston pompası | Basınç: | Yüksek Basınç, Alçak Basınç, Diğer |
|---|---|---|---|
| Yakıt: | Dizel, hidrolik, yağ, elektrikli vakum pompası, Benzin | Teori: | Döner Pompa, Eksenel Akış Pompası, Pistonlu Pompa, Vakum Pompası, hidrolik pompalar |
| Renk: | Siyah, Müşterinin İsteği, doğal, Siyah veya ihtiyacınıza göre özelleştirin | Malzeme: | Dökme Demir, Paslanmaz Çelik, Dökme / Çelik / Bronz / Sfero Demir vb. |
| Ürün adı: | Hidrolik Pompalar, Orijinal Rexroth Hidrolik Dişli Pompa, vickers kanatlı pompa | Garanti: | 1 Yıl,6 Ay-12ay,12 Ay,bir yıl,3 ay veya 1 yıl |
| Menşei: | Shandong, Çin, 100% Orijinal Rexroth Dişli Pompa | ||
| Vurgulamak: | Rexroth hydraulic solenoid valve,German Rexroth proportional valve,imported hydraulic directional valve |
||
4WREE6EA16-2X/G24K31/A1V
4WREE6W1-32-2X/G24K31/A1V
4WREE6V16-2X/G24K31/F1V
Hydraulic solenoid valve, German Rexroth proportional directional valve, imported with original packaging
| Processing & Customization | Yes | Type | Proportional valve |
|---|---|---|---|
| Material | Cast steel | Brand | REXROTH |
| Scope of Application | Hydraulic system | Product Alias | Proportional directional valve |
| Applicable Medium | Oil products | Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) | Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation | Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Disassemble the valve (following the service manual), clean all components with a petroleum-based solvent, dry thoroughly, and inspect for wear or damage.
A: Contamination (dirt, metal particles), fluid degradation (oxidation, varnish), or excessive friction due to misalignment or worn seals.
A: Check the solenoid resistance (typically 2-5 Ω for 24 V DC coils) with a multimeter; no continuity or abnormal resistance indicates a faulty coil.
A: Damaged O-rings/gaskets, loose mounting bolts, port thread damage, or excessive system pressure beyond the valve's rating.
A: Possible causes: incorrect wiring, power supply failure, faulty amplifier, damaged solenoid, or spool sticking; verify each component sequentially.
İlgili kişi: Mr. liyun
Tel: +8615280488899