|
Produktdetails:
|
| Verwendung: | Öl, hydraulische Kolbenpumpe | Druck: | Hochdruck, Niederdruck, Andere |
|---|---|---|---|
| Kraftstoff: | Diesel, Hydraulik, Öl, elektrische Vakuumpumpe, Benzin | Theorie: | Rotationspumpe, Axialpumpe, Kolbenpumpe, Vakuumpumpe, Hydraulikpumpen |
| Farbe: | Schwarz, Kundenwunsch, Natur, Schwarz oder nach Bedarf individuell anpassen | Material: | Gusseisen, Edelstahl, Guss/Stahl/Bronze/duktiles Eisen und so weiter |
| Produktname: | Hydraulikpumpen, Original-Rexroth-Hydraulikzahnradpumpe, Vickers-Flügelzellenpumpe | Garantie: | 1 Jahr, 6 Monate-12 Monate, 12 Monate, ein Jahr, 3 Monate oder 1 Jahr |
| Herkunft: | Shandong, China, 100 % Original-Rexroth-Zahnradpumpe | ||
| Hervorheben: | Rexroth hydraulic solenoid valve,German Rexroth proportional valve,imported hydraulic directional valve |
||
4WREE6EA16-2X/G24K31/A1V
4WREE6W1-32-2X/G24K31/A1V
4WREE6V16-2X/G24K31/F1V
Hydraulic solenoid valve, German Rexroth proportional directional valve, imported with original packaging
| Processing & Customization | Yes | Type | Proportional valve |
|---|---|---|---|
| Material | Cast steel | Brand | REXROTH |
| Scope of Application | Hydraulic system | Product Alias | Proportional directional valve |
| Applicable Medium | Oil products | Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) | Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation | Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Disassemble the valve (following the service manual), clean all components with a petroleum-based solvent, dry thoroughly, and inspect for wear or damage.
A: Contamination (dirt, metal particles), fluid degradation (oxidation, varnish), or excessive friction due to misalignment or worn seals.
A: Check the solenoid resistance (typically 2-5 Ω for 24 V DC coils) with a multimeter; no continuity or abnormal resistance indicates a faulty coil.
A: Damaged O-rings/gaskets, loose mounting bolts, port thread damage, or excessive system pressure beyond the valve's rating.
A: Possible causes: incorrect wiring, power supply failure, faulty amplifier, damaged solenoid, or spool sticking; verify each component sequentially.
Ansprechpartner: Mr. liyun
Telefon: +8615280488899