|
Productdetails:
|
| Gebruik: | Olie, hydraulische zuigerpomp | Druk: | Hoge druk, lage druk, anders |
|---|---|---|---|
| Brandstof: | Diesel, hydraulisch, olie, elektrische vacuümpomp, benzine | Theorie: | Roterende pomp, axiale pomp, zuigerpomp, vacuümpomp, hydraulische pompen |
| Kleur: | Zwart, verzoek van de klant, natuurlijk, zwart of zoals u wilt, aanpassen | Materiaal: | Gietijzer, roestvrij staal, gegoten / staal / brons / nodulair gietijzer enzovoort |
| Productnaam: | Hydraulische pompen, echte Rexroth hydraulische tandwielpomp, Vickers schottenpomp | Garantie: | 1 jaar, 6 maanden-12 maanden, 12 maanden, een jaar, 3 maanden of 1 jaar |
| Oorsprong: | Shandong, China, 100% originele Rexroth-tandwielpomp | ||
| Markeren: | Rexroth hydraulic solenoid valve,German Rexroth proportional valve,imported hydraulic directional valve |
||
4WREE6EA16-2X/G24K31/A1V
4WREE6W1-32-2X/G24K31/A1V
4WREE6V16-2X/G24K31/F1V
Hydraulic solenoid valve, German Rexroth proportional directional valve, imported with original packaging
| Processing & Customization | Yes | Type | Proportional valve |
|---|---|---|---|
| Material | Cast steel | Brand | REXROTH |
| Scope of Application | Hydraulic system | Product Alias | Proportional directional valve |
| Applicable Medium | Oil products | Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) | Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation | Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Disassemble the valve (following the service manual), clean all components with a petroleum-based solvent, dry thoroughly, and inspect for wear or damage.
A: Contamination (dirt, metal particles), fluid degradation (oxidation, varnish), or excessive friction due to misalignment or worn seals.
A: Check the solenoid resistance (typically 2-5 Ω for 24 V DC coils) with a multimeter; no continuity or abnormal resistance indicates a faulty coil.
A: Damaged O-rings/gaskets, loose mounting bolts, port thread damage, or excessive system pressure beyond the valve's rating.
A: Possible causes: incorrect wiring, power supply failure, faulty amplifier, damaged solenoid, or spool sticking; verify each component sequentially.
Contactpersoon: Mr. liyun
Tel.: +8615280488899