logo
Casa ProdottiValvola idraulica Rexroth

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

Sono ora online in chat

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness
German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

Grande immagine :  German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

Dettagli:
Luogo di origine: tedesco
Marca: Rexroth
Certificazione: ISO
Numero di modello: 4WRA6E10-1X/24Z4/M 4WRA6E20-1X/24Z4/M 4WRA6E05-1X/24NZ4/M 4WRA6E20-1X/24NZ4/M 4WRA6E10-1X/24NZ4/M
Termini di pagamento e spedizione:
Quantità di ordine minimo: 1
Prezzo: 2
Imballaggi particolari: Scatola di legno
Tempi di consegna: 2 settimane
Termini di pagamento: Moneygram, Western Union, T/T, D/P, D/A, L/C.
Capacità di alimentazione: 100

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

descrizione
Colore: grigio profondo o personalizzato Misurare: Da 22 a 500
Condizione: Nuovo Pressione pilota: 25 bar
Rotazione: 0,2-CP può essere trasportato al contrario Struttura: pompa a pistone variabile
Carica: Micro5p Teoria: Pompa rotante
Posizione dell'albero della pompa: Orizzontale Carburante: olio idraulico
Velocità di rotazione: 1500-2700 giri / min Modalità di unità: Pompa guidata meccanicamente
Evidenziare:

1500-2700 rpm Rotation Speed Proportional Directional Valve

,

ISO 4406 Fluid Cleanliness Hydraulic Directional Valve

,

German Original Rexroth Hydraulic Valve

Rexroth Proportional Directional Valve
Product Models
  • 4WRA6E10-1X/24Z4/M
  • 4WRA6E20-1X/24Z4/M
  • 4WRA6E05-1X/24NZ4/M
  • 4WRA6E20-1X/24NZ4/M
  • 4WRA6E10-1X/24NZ4/M
Product Specifications
Attribute Value
Processing & Customization Yes
Type Proportional valve
Material Cast steel
Brand REXROTH
Scope of Application Hydraulic system
Applicable Medium Oil products
Applicable Temperature Normal temperature (℃)
Nominal Pressure Normal pressure (MPa)
Nominal Diameter 6-way diameter (mm)
Installation type Threaded installation
Operating Temperature Room temperature
Type (channel location) Straight through type
German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness 0
Technical Specifications
  • Maximum Operating Pressure: Up to 350 bar for P, A, B ports
  • Maximum Flow: Varies with model (e.g., 42 L/min for some 4WRAE6 models)
  • Recommended Fluid Cleanliness: ISO 4406 20/18/15
  • Voltage: Typically 24 V DC
Common Applications
  • Plastic injection molding machines
  • Presses and bending machines
  • Mobile equipment
  • Industrial automation systems where proportional control of speed and direction is needed
Troubleshooting
  • Valve does not shift or responds slowly: Check solenoid coil for burnout or open circuit; check power supply voltage; check for contamination causing the spool to stick
  • Internal Leakage: Worn spool or seals, or contamination causing improper sealing
  • Valve sticking: Often due to inadequate fluid cleanliness, insufficient lubrication, or internal damage
  • Excessive noise: Can be caused by excessive vibration, voltage fluctuations, or issues with the solenoid
  • No function despite signal: Check the amplifier (for 4WRA), wiring, and connections between the control unit and the valve
Maintenance Requirements
  • Regularly check the solenoid coils and valve spool for wear
  • Maintain fluid cleanliness to prevent contamination, which is a primary cause of valve failure. Ensure the filtration system is functioning properly
  • Periodically inspect electrical connections and seals
Note: For specific technical details, ordering information, or detailed troubleshooting for your application, always refer to the official REXROTH technical documentation or contact a certified supplier. The information provided here is for general reference based on public sources.

Dettagli di contatto
Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd.

Persona di contatto: Mr. liyun

Telefono: +8615280488899

Invia la tua richiesta direttamente a noi (0 / 3000)