logo
বাড়ি পণ্যরেক্সরথ হাইড্রোলিক ভালভ

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness
German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

বড় ইমেজ :  German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

পণ্যের বিবরণ:
উৎপত্তি স্থল: জার্মান
পরিচিতিমুলক নাম: Rexroth
সাক্ষ্যদান: ISO
মডেল নম্বার: 4WRA6E10-1X/24Z4/M 4WRA6E20-1X/24Z4/M 4WRA6E05-1X/24NZ4/M 4WRA6E20-1X/24NZ4/M 4WRA6E10-1X/24NZ4/M
প্রদান:
ন্যূনতম চাহিদার পরিমাণ: 1
মূল্য: 2
প্যাকেজিং বিবরণ: কাঠের বাক্স
ডেলিভারি সময়: 2 সপ্তাহ
পরিশোধের শর্ত: মানিগ্রাম, ওয়েস্টার্ন ইউনিয়ন, টি/টি, ডি/পি, ডি/এ, এল/সি
যোগানের ক্ষমতা: 100

German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness

বিবরণ
রঙ: গভীর ধূসর বা কাস্টমাইজড আকার: 22 থেকে 500
অবস্থা: নতুন পাইলট চাপ: 25 বার
ঘূর্ণন: 0.2-সিপি বিপরীতে পরিবহন করা যেতে পারে গঠন: পরিবর্তনশীল পিস্টন পাম্প
চার্জিং: মাইক্রো 5 পি তত্ত্ব: রোটারি পাম্প
পাম্প শ্যাফ্ট অবস্থান: অনুভূমিক জ্বালানী: জলবাহী তেল
ঘূর্ণন গতি: 1500-2700 আরপিএম ড্রাইভ মোড: যান্ত্রিকভাবে চালিত পাম্প
বিশেষভাবে তুলে ধরা:

1500-2700 rpm Rotation Speed Proportional Directional Valve

,

ISO 4406 Fluid Cleanliness Hydraulic Directional Valve

,

German Original Rexroth Hydraulic Valve

Rexroth Proportional Directional Valve
Product Models
  • 4WRA6E10-1X/24Z4/M
  • 4WRA6E20-1X/24Z4/M
  • 4WRA6E05-1X/24NZ4/M
  • 4WRA6E20-1X/24NZ4/M
  • 4WRA6E10-1X/24NZ4/M
Product Specifications
Attribute Value
Processing & Customization Yes
Type Proportional valve
Material Cast steel
Brand REXROTH
Scope of Application Hydraulic system
Applicable Medium Oil products
Applicable Temperature Normal temperature (℃)
Nominal Pressure Normal pressure (MPa)
Nominal Diameter 6-way diameter (mm)
Installation type Threaded installation
Operating Temperature Room temperature
Type (channel location) Straight through type
German Original Rexroth Proportional Directional Valve with 1500-2700 rpm Rotation Speed and ISO 4406 Fluid Cleanliness 0
Technical Specifications
  • Maximum Operating Pressure: Up to 350 bar for P, A, B ports
  • Maximum Flow: Varies with model (e.g., 42 L/min for some 4WRAE6 models)
  • Recommended Fluid Cleanliness: ISO 4406 20/18/15
  • Voltage: Typically 24 V DC
Common Applications
  • Plastic injection molding machines
  • Presses and bending machines
  • Mobile equipment
  • Industrial automation systems where proportional control of speed and direction is needed
Troubleshooting
  • Valve does not shift or responds slowly: Check solenoid coil for burnout or open circuit; check power supply voltage; check for contamination causing the spool to stick
  • Internal Leakage: Worn spool or seals, or contamination causing improper sealing
  • Valve sticking: Often due to inadequate fluid cleanliness, insufficient lubrication, or internal damage
  • Excessive noise: Can be caused by excessive vibration, voltage fluctuations, or issues with the solenoid
  • No function despite signal: Check the amplifier (for 4WRA), wiring, and connections between the control unit and the valve
Maintenance Requirements
  • Regularly check the solenoid coils and valve spool for wear
  • Maintain fluid cleanliness to prevent contamination, which is a primary cause of valve failure. Ensure the filtration system is functioning properly
  • Periodically inspect electrical connections and seals
Note: For specific technical details, ordering information, or detailed troubleshooting for your application, always refer to the official REXROTH technical documentation or contact a certified supplier. The information provided here is for general reference based on public sources.

যোগাযোগের ঠিকানা
Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd.

ব্যক্তি যোগাযোগ: Mr. liyun

টেল: +8615280488899

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)

অন্যান্য পণ্যসমূহ