|
تفاصيل المنتج:
|
| تطبيق: | القياس، أخرى، النظام الهيدروليكي، المضخات الهيدروليكية، حفارة | بناء: | مضخة المكبس، مضخة التروس، مضخة مرحلة واحدة، المضخات الهيدروليكية |
|---|---|---|---|
| قوة: | الهيدروليكية ، الكهربائية | ضغط: | الضغط العالي، الضغط المنخفض، أخرى |
| وقود: | الديزل، الهيدروليكية، النفط، مضخة فراغ كهربائية، البنزين | الاسم: | مضخة مكبس ريكسروث ، مضخة 90R100 ، أجزاء مضخة الحفارة مضخات هيدروليكية لمضخة ريكسروث |
| أصل: | شاندونغ، الصين، مضخة تروس ريكسروث الأصلية 100% | ||
| إبراز: | Rexroth proportional hydraulic valve,German original hydraulic valve,Electromagnetic directional valve Rexroth,German original hydraulic valve,Electromagnetic directional valve Rexroth |
||
4WREE6W16-2X/G24K31/A1V
4WREE6W08-2X/G24K31/A1V
4WREE6V32-2X/G24K31/A1V
| Processing & Customization | Yes | Type | Proportional valve |
|---|---|---|---|
| Material | Cast steel | Model | 4WREE6W16-2X/G24K31/A1V 4WREE6W08-2X/G24K31/A1V 4WREE6V32-2X/G24K31/A1V |
| Brand | REXROTH | Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve | Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) | Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) | Installation type | Threaded installation |
| Operating Temperature | Room temperature | Type (channel location) | Straight through type |
4WREE6WA32-2X/G24K31/F1V
4WREE6W32-2X/G24K31/F1V
4WREE6W1-32-2X/G24K31/F1V
4WREE6E08-2X/G24K31/F1V
4WREE6V32-2X/G24K31/F1V
4WREE6W16-2X/G24K31/F1V
4WREE6EA08-2X/G24K31/F1V
4WREE6EA32-2X/G24K31/F1V
4WREE6WA08-2X/G24K31/F1V
4WREE6WA16-2X/G24K31/F1V
Common causes include: no power supply to the solenoid, damaged wiring, incorrect control signal (e.g., 0-5 V instead of 0-10 V), or a faulty solenoid coil. Check wiring continuity and signal levels first.
Drain port leakage may result from excessive backpressure (exceeding 5 bar), worn seal rings, or internal spool damage. Ensure the drain line is unobstructed and check seal integrity.
Inconsistent flow can be due to contaminated hydraulic fluid (clogging the valve's orifices), fluctuating supply pressure, or a damaged proportional solenoid. Filter the fluid and inspect the solenoid for wear.
Overheating may occur from high pressure drops (exceeding the valve's rated ΔP), insufficient fluid flow through the valve, or a stuck spool. Reduce pressure drop and ensure adequate fluid circulation.
Noise can stem from cavitation (low fluid pressure), loose mounting bolts, or air in the hydraulic system. Bleed the system, check for leaks, and ensure the supply pressure is within the recommended range.
For maintenance and service information, please contact our technical support team.
اتصل شخص: Mr. liyun
الهاتف :: +8615280488899
