Drive Shaft:Tapered 1:5 with Key (Ø17 mm)
Port Connection:Square Flange (ISO 8434-1)
Mounting Flange:Rectangular Flange, Ø80 mm
Geometric Displacement:19.0 cm³/rev
Housing Material:Aluminum
Weight:Approx. 3.9 kg
Fluid Cleanliness:NAS 1638 Class 10 (Recommended: Class 9)
Viscosity Range:12 - 800 mm²/s (Optimal: 20 - 100 mm²/s)
Hydraulic Fluid:Mineral-based oils (HL, HLP), HFC, HFD, HETG, HEES
Port Connection:Square Flange (ISO 8434-1)
Drive Shaft:Tapered 1:5 with Key (Ø18 mm)
Mounting Flange:Rectangular Flange, Ø80 mm
Weight (approx.):7.9 kg
Viscosity Range:10–800 mm²/s
Fluid Temperature Range:-30 °C to +80 °C (NBR seals)
Maximum Pressure:280 bar
Pump:Rexroth
Mounting Type:Flange mounting
Direction Of Rotation:Clockwise or counterclockwise
After Serive:online video
Displacement:28cc/45cc/71cc/100cc/140cc/180cc
Component Series:2X (series 20+, dimensionally interchangeable)
Max. Adjustable Flow:10 L/min (Q range typically 0.2–10 L/min)
Max. Operating Pressure:315 bar (ports A & B)
Weight (approx.):~195 kg
Mounting Flange:ISO 3019-2 (4-bolt, metric)
Theoretical Flow @ 1500 rpm:~532 L/min
Nominal Displacement:355 cm³/rev
Recommended Speed:1000 – 1500 rpm (Max ~1800 rpm subject to inlet conditions)
Mounting Flange:ISO 3019-2 (4-bolt, metric)
Weight (approx.):~240 kg
Compatible Fluids:Mineral oils (HL/HLP), HFC (Water Glycol with derating)
Seal Material:NBR (Standard, code P implied)
Mounting Flange:ISO 3019-2 (4-bolt, metric)
Rotation Direction:Counter-Clockwise (L) — viewed from shaft end
Shaft Type:Parallel Key Shaft (DIN 6885)