Rexroth 4WE10G5X/HG24N9K4/M Directional Valve - Parameter Table
|
Parameter
|
Value / Description
|
|
Valve Type
|
Solenoid-operated directional control valve
|
|
Model
|
4WE 10 G5X/HG24N9K4/M
|
|
Design
|
Wet-pin solenoid; Subplate mounting
|
|
Connection Size (P/A/B/T)
|
G 1/4"
|
|
Nominal Size
|
10 mm
|
|
Maximum Operating Pressure
|
315 bar
|
|
Maximum Flow Rate
|
60 l/min
|
|
Number of Positions/Ways
|
4-way, 3-position
|
|
Spool Type (G5X)
|
Pressure port P blocked, work port A connected to pressure P, work port B connected to tank T in center position ("A pressure, B tank center" or "Mid-position supply to A")
|
|
Control Method
|
Single solenoid, with spring return to center
|
|
Solenoid Specification (HG24N9K4)
|
24V DC; with manual override; plug connector (DIN 43650 Form A)
|
|
Operating Voltage
|
24V DC
|
|
Power Consumption
|
Typically ~22W (Confirm with official datasheet)
|
|
Protection Class (Coil)
|
IP65 standard
|
|
Duty Cycle
|
100%
|
|
Mounting
|
According to ISO 4401-05 (CETOP 5)
|
|
Weight (approx.)
|
~3.0 kg (with coil)
|
|
Housing Material
|
Aluminum alloy
|
|
Sealing Material
|
Nitrile rubber (NBR) standard; FKM optional
|
|
Fluid Temperature Range
|
-20 °C to +80 °C (with NBR seals)
|
|
Recommended Viscosity Range
|
10 to 400 mm²/s
|
|
Fluid Compatibility
|
Mineral oils (HL, HLP per ISO 6743-4)
|
|
Filtration Requirement
|
Cleanliness class 20/18/15 per ISO 4406 (recommended)
|
| 4WE10A33/CG24N9K4 |
| 4WE10A33/CW230N9K4 |
| 4WE10C33/CG24N9K4 |
| 4WE10C33/CW230N9K4 |
| 4WE10D33/CG24N9K4 |
| 4WE10D33/CW230N9K4 |
| 4WE10B33/CG24N9K4 |
| 4WE10B33/CW230N9K4 |
| 4WE10Y33/CG24N9K4 |
| 4WE10Y33/CW230N9K4 |
| 4WE10E33/CG24N9K4 |
| 4WE10E33/CW230N9K4 |
| 4WE10F33/CG24N9K4 |
| 4WE10F33/CW230N9K4 |
| 4WE10G33/CG24N9K4 |
| 4WE10G33/CW230N9K4 |
| 4WE10H33/CG24N9K4 |
| 4WE10H33/CW230N9K4 |
| 4WE10J33/CG24N9K4 |
| 4WE10J33/CW230N9K4 |
| 4WE10M33/CG24N9K4 |
| 4WE10M33/CW230N9K4 |
| 4WE10Q33/CG24N9K4 |
| 4WE10Q33/CW230N9K4 |
| 4WE10R33/CG24N9K4 |
| 4WE10R33/CW230N9K4 |
| 4WE10T33/CG24N9K4 |
| 4WE10T33/CW230N9K4 |
| 4WE10U33/CG24N9K4 |
| 4WE10U33/CW230N9K4 |
| 4WE10V33/CG24N9K4 |
| 4WE10V33/CW230N9K4 |
| 4WE10W33/CG24N9K4 |
| 4WE10W33/CW230N9K4 |
| 0811404613 4WRPEH6C4B40L-2X/G24K0/A1M |
| 0811404801 4WRPEH10C3B100L-2X/G24K0/A1M |
| 0811404680 4WRLE10Q3-85M-3X/G24ETK0/A1M |
| 0811404342 4WRLE16Q3-200M-3X/G24K0/A1M |
| R901131953 4WRLE25Q3-370M-3X/G24K0/A1M |
| 0811404438 4WRLE27Q4-430M-3X/G24K0/A1M |
| 0811404430 4WRLE25V370M-3X/G24K0/A1M |
| 0811402071 DBETBEX-1X/180G24K31A1M |
| 0811402003 DBETBX-1X/180G24-37Z4M |
| 0811403001 4WRP10EA63S-1X/G24Z4/M |
| 0811402036 DBETX-1X/50G24-8NZ4M |
| 0811402019 DBETX-1X/250G24-8NZ4M |
| 0811402016 DBETX-1X/315G24-8NZ4M |
| 0811402017 DBETX-1X/180G24-8NZ4M |
| 0811402055 DRE6X-1X/175MG24-8NZ4M |
| R900907114 4WREE6E32-2X/G24K31/A1V |
| R900911004 4WREE6W32-2X/G24K31/A1V |
| R900927230 4WREE10E75-2X/G24K31/A1V |
| R900927233 4WREE10W75-2X/G24K31/A1V |
| R902436353 A10VSO100 DRS/32R-VPB12N00 |
| R900955887 3DREP6C-2X/25EG24N9K4/M |
| R900954427 3DREPE6C-21/25EG24K31/A1M |
| R900958848 3DREPE6C-21/25EG24N9K31/F1M |
| R900561180 3WE 6 A6X/EG24N9K4 |
| R900592014 3WE10 A5X/EG24N9K4/M |
| R901391203 4WE 10 C5X/HG24N9K4/M |
Rexroth 4WE10G5X/HG24N9K4/M Directional Valve - FAQ
Q1: What is the unique function of the "G5X" spool?
A: The "G5X" spool has a specialized center position. In neutral, it blocks the main pressure port (P), connects work port A to the pressure line, and connects work port B to the tank (T). This applies pressure to one side of an actuator and drains the other side simultaneously while the valve is centered.
Q2: What is this center position configuration typically used for?
A: This is a differential or "mid-position" function. It is typically used to pre-position or hold a hydraulic cylinder in a specific intermediate state when the valve is not actively being shifted. Common applications include holding a clamping cylinder partially extended or maintaining a specific position in a multi-stage system.
Q3: How is the valve operated?
A: It is controlled by a single 24V DC solenoid ("HG24N9K4" coil). Energizing the solenoid shifts the spool to a full working position. De-energizing it allows internal springs to return the spool to the specialized differential center position described above. A manual override is provided for testing.
Q4: What are the pressure and flow ratings?
A: Maximum operating pressure: 315 bar. Maximum recommended flow rate: 60 liters per minute.
Q5: What are the electrical specifications?
A: The solenoid operates on 24V DC, with a protection class of IP65. Please refer to the official data sheet for exact power consumption and current ratings.
Q6: How is the valve installed?
A: It mounts on a standard ISO 4401-05 (CETOP 5) subplate. The hydraulic ports are G 1/4". Electrical connection is via a plug connector.
Q7: What are the fluid requirements?
A: Use standard mineral-based hydraulic oils (HL, HLP). Maintaining high fluid cleanliness (ISO 4406 20/18/15 recommended) with proper filtration is essential for reliable operation.
Q8: Where can I find the complete technical data?
A: For the complete datasheet, performance curves, and the exact hydraulic symbol for this specific spool type, please consult the official technical documentation for order code R901427832.
Your message must be between 20-3,000 characters!
English
