|
Product Details:
|
| Shaft Size: | 25 Mm | Fuel: | Hydraulic Oil |
|---|---|---|---|
| Shaft Type: | Spline | Products Name: | Rexroth Hydraulic Piston Pump |
| Weight: | 12-30 Kg | Operating Temperature Range: | -20 To 80 Degrees Celsius |
| Pump Shaft Position: | Horizontal | Transport Package: | Wooden Box |
| Nominal Pressure: | 350 Bar | Seal Type: | Lip Seal Or Mechanical Seal |
| Highlight: | Rexroth hydraulic proportional valve,German directional valve Rexroth,Original Rexroth hydraulic valve |
||
| Attribute | Value |
|---|---|
| Brand | REXROTH |
| Type | Proportional valve |
| Material | Cast steel |
| Scope of Application | Hydraulic system |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Disassemble the valve (following the service manual), clean all components with a petroleum-based solvent, dry thoroughly, and inspect for wear or damage.
A: Contamination (dirt, metal particles), fluid degradation (oxidation, varnish), or excessive friction due to misalignment or worn seals.
A: Check the solenoid resistance (typically 2-5 Ω for 24 V DC coils) with a multimeter; no continuity or abnormal resistance indicates a faulty coil.
A: Damaged O-rings/gaskets, loose mounting bolts, port thread damage, or excessive system pressure beyond the valve's rating.
A: Possible causes: incorrect wiring, power supply failure, faulty amplifier, damaged solenoid, or spool sticking; verify each component sequentially.
Contact Person: Mr. liyun
Tel: +8615280488899