|
Detalhes do produto:
|
| Tamanho do eixo: | 25 mm | Combustível: | óleo hidráulico |
|---|---|---|---|
| Tipo de eixo: | Spline | Nome dos produtos: | Bomba de pistão hidráulico de Rexroth |
| Peso: | 12-30kg | faixa de temperatura operacional: | -20 a 80 graus Celsius |
| Posição do eixo da bomba: | Horizontal | Pacote de Transporte: | Caixa de madeira |
| Pressão nominal: | 350 bar | Tipo de vedação: | Vedação labial ou selo mecânico |
| Destacar: | Rexroth hydraulic proportional valve,German directional valve Rexroth,Original Rexroth hydraulic valve |
||
| Attribute | Value |
|---|---|
| Brand | REXROTH |
| Type | Proportional valve |
| Material | Cast steel |
| Scope of Application | Hydraulic system |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: Disassemble the valve (following the service manual), clean all components with a petroleum-based solvent, dry thoroughly, and inspect for wear or damage.
A: Contamination (dirt, metal particles), fluid degradation (oxidation, varnish), or excessive friction due to misalignment or worn seals.
A: Check the solenoid resistance (typically 2-5 Ω for 24 V DC coils) with a multimeter; no continuity or abnormal resistance indicates a faulty coil.
A: Damaged O-rings/gaskets, loose mounting bolts, port thread damage, or excessive system pressure beyond the valve's rating.
A: Possible causes: incorrect wiring, power supply failure, faulty amplifier, damaged solenoid, or spool sticking; verify each component sequentially.
Pessoa de Contato: Mr. liyun
Telefone: +8615280488899