|
Szczegóły Produktu:
|
| Stosowanie: | Olej, hydrauliczna pompa tłokowa | Aplikacja: | Dozowanie, inne, układ hydrauliczny, pompy hydrauliczne, koparka |
|---|---|---|---|
| Struktura: | Pompa tłokowa, pompa zębata, pompa jednostopniowa, pompy hydrauliczne | Moc: | Hydrauliczny, elektryczny |
| Ciśnienie: | Wysokie ciśnienie, niskie ciśnienie, inne | Stan: | 100% nowa, nowa pompa Rexroth, nowa i oryginalna OEM, Oringal nowa, trwała |
| Typ: | Agregaty hydrauliczne, A8VO55/80/107/160, Pompa hydrauliczna Rexroth, A8VO80LA1KH1/63R1 | Nazwa: | Pompa tłokowa Rexroth, pompa 90R100, części pompy koparki pompy hydrauliczne Rexroth |
| Podkreślić: | Rexroth hydraulic proportional directional valve,Germany made Rexroth hydraulic valve,original imported Rexroth proportional valve |
||
| Selection Dimension | Specific Parameters/Options | Description |
|---|---|---|
| Model Designation | 4WRE | Basic model: Direct-acting proportional directional valve with electrical position feedback and no integrated electronics (OBE) |
| Integrated Electronics (OBE) | No Code | Standard configuration without integrated electronics; external amplifier required (to be ordered separately) |
| Nominal Size | 6 | Core size with component series 2X; mounting dimensions comply with Series 20-29 standards |
| Valve Core Type | 4/2 (2-position 4-way), 4/3 (3-position 4-way) | 4/3 type features spring-centered spool for automatic reset when de-energized; suitable for different oil circuit directional control needs |
| Rated Flow (Δp=10bar) | 4L/min (Code 04), 8L/min (Code 08), 16L/min (Code 16), 32L/min (Code 32) | Flow rates distinguished by corresponding codes; matched to hydraulic system flow requirements |
| Seal Material | V (FKM Fluororubber) | Default FKM material; compatible with mineral oil and other hydraulic fluids to ensure sealing performance |
| Power Supply Voltage | G24 (DC 24V) | Suitable for industrial standard DC power supply; meets proportional solenoid drive requirements |
| Electrical Interface | A1 (±10V Voltage Input), F1 (4-20mA Current Input) | Two interface options available; compatible with PLCs, computers, and other control signal sources |
| Electrical Connection | K4 (No Plug) | Plug compliant with DIN EN 175301-803 standard required (to be ordered separately) |
| Special Protection | J (Seawater-Resistant) | Only available for Size 6; suitable for marine-related or humid/corrosive working conditions |
| Mounting Standard | ISO 4401 | Panel mounting with standard mounting hole pattern; compatible with universal hydraulic system manifold layouts |
| Maximum Working Pressure | 315bar | Suitable for most medium-to-high pressure industrial hydraulic scenarios (e.g., hydraulic actuators in machine tools, automated production lines) |
Connect the signal source's positive terminal to the valve's "IN" pin, the negative terminal to "GND", and ensure the power supply (24 V DC) is connected to "V+" and "GND".
Typical current consumption is 0.8-1.2 A for 24 V DC coils and 1.6-2.4 A for 12 V DC coils (check the valve's datasheet for exact values).
Yes, integrated electronics (IPE) models include short-circuit protection, which shuts down the coil if a short is detected, preventing damage.
Shielded cables are recommended to reduce electromagnetic interference (EMI), especially in industrial environments with high electrical noise. Ground the shield at one end only.
Fluid temperature should be between -20°C and +60°C (-4°F to +140°F); temperatures above 60°C may accelerate seal wear and reduce fluid viscosity.
Osoba kontaktowa: Mr. liyun
Tel: +8615280488899
