|
جزئیات محصول:
|
| استفاده: | روغن ، پمپ پیستون هیدرولیک | برنامه: | اندازه گیری، سایر، سیستم هیدرولیک، پمپ های هیدرولیک، بیل مکانیکی |
|---|---|---|---|
| ساختار: | پمپ پیستونی، پمپ دنده ای، پمپ تک مرحله ای، پمپ های هیدرولیک | فشار: | فشار بالا، فشار کم، سایر موارد |
| سوخت: | دیزل، هیدرولیک، روغن، پمپ خلاء الکتریکی، بنزین | رنگ: | مشکی، درخواست مشتری، طبیعی، مشکی یا همانطور که نیاز دارید، سفارشی کنید |
| نام محصول: | پمپ های هیدرولیک، پمپ دنده ای هیدرولیک رکسروث، پمپ پره ای ویکرز | وضعیت: | 100% جدید، پمپ Rexroth جدید، OEM جدید و اصلی، Oringal جدید، بادوام |
| ویژگی: | راندمان بالا ، عمر طولانی | تایپ کنید: | واحدهای برق هیدرولیک، A8VO55/80/107/160، پمپ هیدرولیک Rexroth، A8VO80LA1KH1/63R1 |
| نام: | پمپ پیستونی رکسروث، پمپ 90R100، قطعات پمپ بیل مکانیکی پمپ های هیدرولیک پمپ رکسروث | ||
| برجسته کردن: | Rexroth hydraulic proportional valve,Rexroth electromagnetic directional valve,Germany Rexroth hydraulic valve,Rexroth electromagnetic directional valve,Germany Rexroth hydraulic valve |
||
4WREE6EA16-2X/G24K31/F1V
4WREE6E1-16-2X/G24K31/F1V
4WREE6E1-08-2X/G24K31/F1V
| Attribute | Value |
|---|---|
| Processing & Customization | Yes |
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: A minimum filter fineness of 10 μm (β10 ≥ 75) is required to protect the valve's precision components from contamination.
A: Yes, it is compatible with manifold mounting (ISO 4401 manifolds) for space-saving and centralized hydraulic system designs.
A: Use O-rings or flat gaskets (compatible with hydraulic fluid) and ensure proper port cleaning before assembly; avoid over-tightening bolts.
A: The drain port (marked "R" or "L") should be connected to the tank with minimal backpressure (< 3 bar) to ensure proper solenoid cooling and seal lubrication.
A: A bypass valve is not mandatory but recommended to flush the system before commissioning, removing contaminants that may damage the valve.
تماس با شخص: Mr. liyun
تلفن: +8615280488899