|
পণ্যের বিবরণ:
|
| ব্যবহার: | তেল, জলবাহী পিস্টন পাম্প | আবেদন: | মিটারিং,অন্যান্য,হাইড্রোলিক সিস্টেম,হাইড্রোলিক পাম্প, এক্সভাকেটর |
|---|---|---|---|
| গঠন: | পিস্টন পাম্প, গিয়ার পাম্প, একক পর্যায়ের পাম্প, হাইড্রোলিক পাম্প | চাপ: | উচ্চ চাপ, নিম্নচাপ, অন্যান্য |
| জ্বালানী: | ডিজেল, জলবাহী, তেল, বৈদ্যুতিক ভ্যাকুয়াম পাম্প, পেট্রল | রঙ: | কালো, গ্রাহকের অনুরোধ, প্রাকৃতিক, কালো বা আপনার প্রয়োজন অনুযায়ী, কাস্টমাইজ করুন |
| পণ্যের নাম: | হাইড্রোলিক পাম্প, জেনুইন রেক্সরথ হাইড্রোলিক গিয়ার পাম্প, ভিকার্স ভ্যান পাম্প | অবস্থা: | 100% নতুন, নতুন রেক্সরথ পাম্প, OEM নতুন এবং আসল, ওরিংগাল নতুন, টেকসই |
| বৈশিষ্ট্য: | উচ্চ দক্ষতা, দীর্ঘ জীবন | টাইপ: | হাইড্রোলিক পাওয়ার ইউনিট, A8VO55/80/107/160, হাইড্রোলিক পাম্প Rexroth,A8VO80LA1KH1/63R1 |
| নাম: | Rexroth পিস্টন পাম্প, 90R100 পাম্প, খননকারী পাম্প অংশ rexroth পাম্প জলবাহী পাম্প | ||
| বিশেষভাবে তুলে ধরা: | Rexroth hydraulic proportional valve,Rexroth electromagnetic directional valve,Germany Rexroth hydraulic valve |
||
4WREE6EA16-2X/G24K31/F1V
4WREE6E1-16-2X/G24K31/F1V
4WREE6E1-08-2X/G24K31/F1V
| Attribute | Value |
|---|---|
| Processing & Customization | Yes |
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
A: A minimum filter fineness of 10 μm (β10 ≥ 75) is required to protect the valve's precision components from contamination.
A: Yes, it is compatible with manifold mounting (ISO 4401 manifolds) for space-saving and centralized hydraulic system designs.
A: Use O-rings or flat gaskets (compatible with hydraulic fluid) and ensure proper port cleaning before assembly; avoid over-tightening bolts.
A: The drain port (marked "R" or "L") should be connected to the tank with minimal backpressure (< 3 bar) to ensure proper solenoid cooling and seal lubrication.
A: A bypass valve is not mandatory but recommended to flush the system before commissioning, removing contaminants that may damage the valve.
ব্যক্তি যোগাযোগ: Mr. liyun
টেল: +8615280488899