|
제품 상세 정보:
|
| 무게: | 대략. 1.4kg | 씰 재질: | FKM (Viton®) — 접미사 V |
|---|---|---|---|
| 호환 가능한 유체: | 미네랄 오일(HL/HLP), HFC(물 글리콜), HFD(인산염 에스테르 - FKM 포함) | 작동 온도. 범위: | -20°C ~ +80°C(FKM 씰 포함) |
| 유체 청결도: | ISO 4406 17/15/12 또는 더 깨끗한 (단단한 오리피스 — 더 미세한 여과 필요) | ||
| 강조하다: | Rexroth speed control valve German made,Rexroth hydraulic valve 2FRM6A36,Rexroth control valve with warranty |
||
|
Parameter Category |
Parameter |
Specification |
|---|---|---|
|
General Information |
Brand / Model |
Rexroth (Germany), 2FRM6A36-2X/3QRV |
|
Order Code (Material No.) |
R983032396 |
|
|
Valve Type |
2-way Pressure-Compensated Flow Control Valve (Sandwich Plate) |
|
|
Performance Parameters |
Nominal Size |
NG6 (D03 / ISO 4401-03-02-0-05) |
|
Max. Operating Pressure (P-port) |
315 bar |
|
|
Max. Drain Pressure (Y-port) |
160 bar (recommend zero backpressure to tank) |
|
|
Adjustable Flow Range |
0.05 – 3.0 L/min (Code /3Q = max. flow 3 L/min) |
|
|
Throttle Direction |
A → A₁ (Meter-In); Free return A₁ → A via integrated check ("A" version) |
|
|
Compensation |
Integrated pressure compensator (keeps ∆P across orifice constant ≈ 3–5 bar typ.) |
|
|
Mechanical Interface |
Mounting Style |
Sandwich Plate (installed between NG6 directional valve and subplate) |
|
Mounting Bolts |
4 × M5 (ISO 4762, Grade 10.9), torque ~8–10 Nm cross pattern |
|
|
Adjustment Type |
Spindle with Scale & Lock Nut ("36" code) + Protective Cap |
|
|
Drain Requirement |
External drain port Y → Tank (dedicated line, zero backpressure) |
|
|
Weight |
Approx. 1.4 kg |
|
|
Media & Environment |
Seal Material |
FKM (Viton®) — suffix V |
|
Compatible Fluids |
Mineral Oils (HL/HLP), HFC (Water Glycol), HFD (Phosphate Ester — with FKM) |
|
|
Operating Temp. Range |
-20°C to +80°C (with FKM seals) |
|
|
Fluid Cleanliness |
ISO 4406 17/15/12 or cleaner (tight orifice — finer filtration required) |
|
|
Special Note |
IN001 = Internal Inspection Lot Reference (no functional difference) |
| R900205577 2FRM6B36-3X/0,2QMV |
| R900205509 2FRM6B36-3X/10QRV |
| R900205514 2FRM6B36-3X/32QMV |
| R900209927 2FRM6B76-34/10QRV |
| R900205521 2FRM6B76-3X/16QMV |
| R900205523 2FRM6B76-3X/25QMV |
| R900205510 2FRM6B36-3X/16QMV |
| R900216559 2FRM6A76-3X/16QMV |
| R900205512 2FRM6B36-3X/25QMV |
| R900986124 2FRM6A36-3X/32QMV |
| R900205517 2FRM6B36-3X/3QRV |
| R900205515 2FRM6B36-33/32QRV |
| R900205519 2FRM6B36-32/6QRV |
| R900205511 2FRM6B36-33/16QRV |
| R900205513 2FRM6B36-32/25QRV |
| R900205508 2FRM6B36-3X/10QMV |
| R900205578 2FRM6B36-3X/0,6QMV |
| R900207275 2FRM6B38-3X/0,6QRVSO23 |
| R983032407 2FRM6B36-2X/0.6QRV |
| R983032406 2FRM6B36-2X/0.6QMV-IN001 |
Q1: What is the difference between "A" and "B" versions of 2FRM6?
A:
2FRM6A… = Throttling in A → A₁ direction (meter-in on Port A). Used when the valve is stacked on the A-port side between directional valve and subplate.
2FRM6B… = Throttling in B → B₁ direction (meter-in on Port B).
For speed control on both extend and retract, two valves (one A + one B) are typically stacked. The free-flow return direction always has an open check valve.
Q2: Why does this valve need an external drain (Y port) and what happens if I omit it?
A: The pressure compensator spool balances spring force against pilot/drain pressure. The Y port must be connected directly to tank with zero backpressure. If Y is blocked or sees backpressure, the compensator cannot function correctly → flow becomes pressure-dependent and unstable. Never plug the Y port on a 2FRM valve.
Q3: How is this different from a Z2FS6 needle throttle valve?
A: The 2FRM6 has a pressure compensator that maintains a constant pressure drop across the metering orifice. This means the set flow stays constant despite load pressure changeson P or A ports. A Z2FS6 is a simple needle/throttle — flow varies with ∆P. Use 2FRM when consistent speed under varying load is required; use Z2FS for coarse, cost-sensitive throttling.
Q4: What is the practical meaning of the "3Q" flow code?
A: /3Q sets the maximum adjustable flow to 3 L/min. The usable range is approx. 0.05–3.0 L/min. Select the Q-code closest to your required max flow — a smaller Q-range gives better fine-adjustment resolution. If you need 6 or 16 L/min, choose /6Q or /16Q variants. Do not try to use a 3Q valve for flows >3 L/min.
Q5: Why FKM (Viton) seals on this valve?
A: The V suffix = FKM seals, required for:
Service temperatures above +70°C (up to +80°C)
Water glycol (HFC) or phosphate ester (HFD) fire-resistant fluids
For standard mineral oil (HL/HLP) at normal temps, the NBR version is acceptable. The FKM version (this part) provides broader fluid compatibility and higher temp rating — choose based on your fluid & temperature.
담당자: Mr. liyun
전화 번호: +8615280488899
Korean
