|
제품 상세 정보:
|
| 색상: | 깊은 회색 또는 맞춤형 | 드라이브 모드: | 6-250m3 |
|---|---|---|---|
| 구조: | 축 플런저 펌프 | 씰 유형: | 립 씰 또는 기계적 씰 |
| 용법: | 기름 | 무게: | 5~20kg(모델에 따라 다름) |
| 예어: | 렉스 로스 유압 펌프 | 작동 온도 범위: | -20 ° C ~ 80 ° C |
| 속도: | 3 속도 설정 | ||
| 강조하다: | Rexroth hydraulic proportional solenoid valve,German made Rexroth directional valve,Rexroth electromagnetic valve with warranty |
||
4WRE6W1-08-2X/G24K4/V, 4WRE6E32-2X/G24K4/V, 4WRE6E1-32-2X/G24K4/V German-made electromagnetic directional valves
| Complete Model Example | Model Code Breakdown | Core Configuration Parameters | Release Status |
|---|---|---|---|
| 4WRE 6 E04-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 04: Rated Flow 4L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 4L/min Seal: FKM Power Supply: DC24V Interface: ±10V/4-20mA |
Mass Production |
| 4WRE 6 E08-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 08: Rated Flow 8L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 8L/min Seal: FKM Power Supply: DC24V Interface: ±10V/4-20mA |
Mass Production |
| 4WRE 6 E16-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 16: Rated Flow 16L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 16L/min Seal: FKM Power Supply: DC24V Interface: ±10V/4-20mA |
Mass Production |
| 4WRE 6 E32-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 32: Rated Flow 32L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 32L/min Seal: FKM Power Supply: DC24V Interface: ±10V/4-20mA |
Mass Production |
| 4WRE 6 J08-2X/V | 4WRE: Base Model 6: Nominal Size J: 4/2 2-position 4-way 08: Rated Flow 8L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/2 2-position 4-way Flow Rate: 8L/min Seal: FKM Power Supply: DC24V Interface: ±10V/4-20mA |
Mass Production |
| 4WRE 6 E08-2X/VJ | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 08: Rated Flow 8L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) J: Seawater-Resistant |
Valve Type: 4/3 3-position 4-way Flow Rate: 8L/min Seal: FKM Protection: Seawater-resistant Power Supply: DC24V Interface: ±10V/4-20mA |
Specialized Mass Production |
Common causes include: no power supply to the solenoid, damaged wiring, incorrect control signal (e.g., 0-5 V instead of 0-10 V), or a faulty solenoid coil. Check wiring continuity and signal levels first.
Drain port leakage may result from excessive backpressure (exceeding 5 bar), worn seal rings, or internal spool damage. Ensure the drain line is unobstructed and check seal integrity.
Inconsistent flow can be due to contaminated hydraulic fluid (clogging the valve's orifices), fluctuating supply pressure, or a damaged proportional solenoid. Filter the fluid and inspect the solenoid for wear.
Overheating may occur from high pressure drops (exceeding the valve's rated ΔP), insufficient fluid flow through the valve, or a stuck spool. Reduce pressure drop and ensure adequate fluid circulation.
Noise can stem from cavitation (low fluid pressure), loose mounting bolts, or air in the hydraulic system. Bleed the system, check for leaks, and ensure the supply pressure is within the recommended range.
Routine inspections are recommended every 6 months (or 1000 operating hours), including checks for leakage, wiring damage, and fluid contamination.
담당자: Mr. liyun
전화 번호: +8615280488899
