|
제품 상세 정보:
|
| 용법: | 오일, 유압 피스톤 펌프 | 어플리케이션: | 계량, 기타, 유압 시스템, 유압 펌프, 굴착기 |
|---|---|---|---|
| 구조: | 피스톤 펌프, 기어 펌프, 단일 단계 펌프, 유압 펌프 | 압력: | 고압, 저압, 기타 |
| 이론: | 회전식 펌프, 축류 펌프, 왕복 펌프, 진공 펌프, 유압 펌프 | 색상: | 검정색, 고객의 요청, 자연색, 검정색 또는 필요에 따라 사용자 정의 |
| 상태: | 100% 신규, 새로운 Rexroth 펌프, OEM 신규 및 기존, Oringal 신규, 내구성 | 이름: | 렉스로스 피스톤 펌프, 90R100 펌프, 굴삭기 펌프 부품 렉스로스 펌프 유압 펌프 |
| 강조하다: | Rexroth hydraulic solenoid valve,proportional directional valve German made,Rexroth valve with warranty |
||
4WRE6E16-2X/G24K4/V
4WRE6E1-16-2X/G24K4/V
4WRE6V08-2X/G24K4/V
| Attribute | Value |
|---|---|
| Processing & Customization | Yes |
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
4WREE6WA32-2X/G24K31/A1V
4WREE6WA16-2X/G24K31/A1V
4WREE6WA08-2X/G24K31/A1V
4WREE6EA32-2X/G24K31/A1V
4WREE6EA16-2X/G24K31/A1V
4WREE6W1-32-2X/G24K31/A1V
4WREE6V16-2X/G24K31/F1V
4WREE6WA32-2X/G24K31/F1V
4WREE6W32-2X/G24K31/F1V
4WREE6W1-32-2X/G24K31/F1V
4WREE6E08-2X/G24K31/F1V
4WREE6V32-2X/G24K31/F1V
4WREE6W16-2X/G24K31/F1V
4WREE6EA08-2X/G24K31/F1V
4WREE6EA32-2X/G24K31/F1V
4WREE6WA08-2X/G24K31/F1V
4WREE6WA16-2X/G24K31/F1V
Standard voltage ratings include 24 V DC (most common) and 12 V DC; 110 V AC/230 V AC coils are available as special orders.
Connect the signal source's positive terminal to the valve's "IN" pin, the negative terminal to "GND", and ensure the power supply (24 V DC) is connected to "V+" and "GND".
Typical current consumption is 0.8-1.2 A for 24 V DC coils and 1.6-2.4 A for 12 V DC coils (check the valve's datasheet for exact values).
Yes, integrated electronics (IPE) models include short-circuit protection, which shuts down the coil if a short is detected, preventing damage.
Shielded cables are recommended to reduce electromagnetic interference (EMI), especially in industrial environments with high electrical noise. Ground the shield at one end only.
Information about fluid requirements would be listed here.
담당자: Mr. liyun
전화 번호: +8615280488899
