|
商品の詳細:
|
| 使用法: | オイル、油圧ピストンポンプ | アプリケーション: | 計測器,その他,水力システム,水力ポンプ,掘削機 |
|---|---|---|---|
| 構造: | ピストンポンプ、ギヤポンプ、単段ポンプ、油圧ポンプ | プレッシャー: | 高圧、低圧、その他 |
| 理論: | ロータリーポンプ、軸流ポンプ、往復ポンプ、真空ポンプ、油圧ポンプ | 色: | 黒、顧客の要求、ナチュラル、黒または必要に応じて、カスタマイズします |
| 状態: | 100% 新しい、新しい Rexroth ポンプ、OEM 新しい & オリジナル、Oringal 新しい、耐久性のある | 名前: | Rexroth ピストン ポンプ、90R100 ポンプ、掘削機ポンプ部品 Rexroth ポンプ油圧ポンプ |
| ハイライト: | Rexroth hydraulic solenoid valve,proportional directional valve German made,Rexroth valve with warranty |
||
4WRE6E16-2X/G24K4/V
4WRE6E1-16-2X/G24K4/V
4WRE6V08-2X/G24K4/V
| Attribute | Value |
|---|---|
| Processing & Customization | Yes |
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
4WREE6WA32-2X/G24K31/A1V
4WREE6WA16-2X/G24K31/A1V
4WREE6WA08-2X/G24K31/A1V
4WREE6EA32-2X/G24K31/A1V
4WREE6EA16-2X/G24K31/A1V
4WREE6W1-32-2X/G24K31/A1V
4WREE6V16-2X/G24K31/F1V
4WREE6WA32-2X/G24K31/F1V
4WREE6W32-2X/G24K31/F1V
4WREE6W1-32-2X/G24K31/F1V
4WREE6E08-2X/G24K31/F1V
4WREE6V32-2X/G24K31/F1V
4WREE6W16-2X/G24K31/F1V
4WREE6EA08-2X/G24K31/F1V
4WREE6EA32-2X/G24K31/F1V
4WREE6WA08-2X/G24K31/F1V
4WREE6WA16-2X/G24K31/F1V
Standard voltage ratings include 24 V DC (most common) and 12 V DC; 110 V AC/230 V AC coils are available as special orders.
Connect the signal source's positive terminal to the valve's "IN" pin, the negative terminal to "GND", and ensure the power supply (24 V DC) is connected to "V+" and "GND".
Typical current consumption is 0.8-1.2 A for 24 V DC coils and 1.6-2.4 A for 12 V DC coils (check the valve's datasheet for exact values).
Yes, integrated electronics (IPE) models include short-circuit protection, which shuts down the coil if a short is detected, preventing damage.
Shielded cables are recommended to reduce electromagnetic interference (EMI), especially in industrial environments with high electrical noise. Ground the shield at one end only.
Information about fluid requirements would be listed here.
コンタクトパーソン: Mr. liyun
電話番号: +8615280488899
