|
Thông tin chi tiết sản phẩm:
|
| Loại con dấu: | Con dấu môi hoặc con dấu cơ khí | Bảo hành: | một năm |
|---|---|---|---|
| Kiểu lắp: | Mặt bích, chân và mặt | Ngày giao hàng: | 5 ngày |
| Tốc độ tối đa: | Lên tới 5000 vòng/phút | Áp suất tối đa: | 280 thanh |
| Làm nổi bật: | Rexroth proportional pressure relief valve,Hydraulic valve with warranty,Germany Rexroth hydraulic relief valve |
||
Proportional pressure relief valve from Rexroth, Germany
| Parameter | Value / Description |
|---|---|
| Product Model | DBETE-52/100G24K31F1V |
| Nominal Pressure Rating | 100 bar (maximum operating pressure at port P) |
| Supply Voltage | 24 V DC (±10%, 21 to 35 V DC permissible range) |
| Electrical Connection | 6-pin plug + PE, compliant with DIN 43563 standard |
| Control Signal Input | 0 to 10 V analog signal (F1 type) |
| Protection Class | IP65 (dust-tight and protected against water jets) |
| Ambient Temperature Range | -20 °C to +50 °C (operating temperature) |
| Hydraulic Fluid Compatibility | Mineral-based hydraulic oils (HL, HLP per DIN 51524), viscosity range: 10-800 mm²/s |
| Seal Material | FKM (fluorocarbon rubber, indicated by 'V' suffix) |
The nominal pressure rating is 100 bar, and the maximum flow rate is 2 L/min at this pressure. For optimal performance and longevity, it's recommended to operate within these specified limits.
The valve operates on a 24 V DC power supply (permissible range: 21-35 V DC). The control input accepts an analog 0 to 10 V signal (F1 type). Electrical connection is via a 6-pin plug with PE, compliant with DIN 43563 standard.
The valve has an IP65 protection class, making it dust-tight and protected against water jets. The ambient temperature range for operation is -20 °C to +50°C.
This model is compatible with mineral-based hydraulic oils (HL, HLP per DIN 51524 standards), with a viscosity range of 10-800 mm²/s. The seal material is FKM (fluorocarbon rubber), indicated by the 'V' suffix in the model number.
The typical response time for a full signal change is less than 70 ms. The hysteresis is typically ≤ 1%, ensuring precise pressure control with minimal deviation between increasing and decreasing pressure cycles.
Người liên hệ: Mr. liyun
Tel: +8615280488899
Vietnamese
