|
Thông tin chi tiết sản phẩm:
|
| Cách sử dụng: | Dầu, bơm piston thủy lực | Ứng dụng: | Đo sáng,Khác,Hệ thống thủy lực,máy bơm thủy lực,máy xúc |
|---|---|---|---|
| Kết cấu: | Bơm Piston,Bơm bánh răng,Bơm một tầng,Bơm thủy lực | Bảo hành: | 1 năm, 6 tháng-12 tháng, 12 tháng, một năm, 3 tháng hoặc 1 năm |
| Tình trạng: | Mới 100%, Bơm Rexroth mới, OEM mới & nguyên bản, Oringal Mới, bền | Nguồn gốc: | Sơn Đông, Trung Quốc, Máy bơm bánh răng Rexroth nguyên bản 100% |
| Làm nổi bật: | Rexroth proportional hydraulic valve,electro-hydraulic directional valve,Rexroth hydraulic valve with warranty |
||
| Processing & Customization | Yes | Type | Proportional valve |
|---|---|---|---|
| Material | Cast steel | Brand | REXROTH |
| Scope of Application | Hydraulic system | Product Alias | Proportional directional valve |
| Applicable Medium | Oil products | Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) | Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation | Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
Common causes include: no power supply to the solenoid, damaged wiring, incorrect control signal (e.g., 0-5 V instead of 0-10 V), or a faulty solenoid coil. Check wiring continuity and signal levels first.
Drain port leakage may result from excessive backpressure (exceeding 5 bar), worn seal rings, or internal spool damage. Ensure the drain line is unobstructed and check seal integrity.
Inconsistent flow can be due to contaminated hydraulic fluid (clogging the valve's orifices), fluctuating supply pressure, or a damaged proportional solenoid. Filter the fluid and inspect the solenoid for wear.
Overheating may occur from high pressure drops (exceeding the valve's rated ΔP), insufficient fluid flow through the valve, or a stuck spool. Reduce pressure drop and ensure adequate fluid circulation.
Noise can stem from cavitation (low fluid pressure), loose mounting bolts, or air in the hydraulic system. Bleed the system, check for leaks, and ensure the supply pressure is within the recommended range.
For maintenance and service information, please contact our technical support team with your specific model number and application details.
Người liên hệ: Mr. liyun
Tel: +8615280488899