|
|
Thông tin chi tiết sản phẩm:
|
| Gói vận chuyển: | Hộp gỗ | Vị trí trục bơm: | nằm ngang |
|---|---|---|---|
| Đặc điểm kỹ thuật: | gang | Skype: | Sensenhenhao |
| Loại kiểm soát: | Kiểm soát áp lực và dòng chảy | Xoay vòng: | Theo chiều kim đồng hồ hoặc ngược chiều kim đồng hồ |
| Áp lực: | Áp lực cao | Kết nối đầu vào: | Ren hoặc mặt bích |
| Áp suất tối đa: | Thanh 315 | Kiểu: | loại chữ V |
| Tình trạng: | Nguyên tắc chia lưới nội bộ | ||
| Làm nổi bật: | 315 bar Maximum Pressure Gear Pump,Steel Plant Dedicated Hydraulic Pump,Quantitative Rexroth Pump |
||
German Rexroth steel plant dedicated hydraulic gear pump, high pressure quantitative design for demanding industrial applications.
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Maximum Load | 350 MPA | Speed Regulation Range | 250 L/min |
| Control Form | Hydraulic Control | Test Scope | 180-680 |
| Applicable Industries | Machinery, Heavy Industry | Degree of Newness | Brand New |
| Applicable Machinery | Injection Molding Machine | Packing | Wooden Box |
| Brand | Rexroth |
PGH Rexroth Gear Pumps are widely used in industrial machinery (such as plastic injection molding machines, hydraulic presses) and mobile equipment (including construction machinery like small excavators, and agricultural machinery such as tractors) due to their stable pressure output and compact structure.
First, check if the inlet oil filter is clogged and clean or replace it if necessary; second, inspect the sealing parts of the pump (like O-rings) for damage and replace faulty seals; finally, verify if the relief valve matching the pump is stuck and perform maintenance on the valve.
It is recommended to use hydraulic oil that meets ISO VG 46 or ISO VG 68 specifications. The oil should have good anti-wear and anti-oxidation properties, and the oil temperature during operation should be controlled between -10°C and 80°C to avoid affecting pump performance.
For general industrial applications, routine inspection (checking oil level, temperature, and leakage) should be conducted monthly; oil change and filter replacement are recommended every 6 months or after 2000 hours of operation; a comprehensive disassembly and inspection of the pump should be carried out every 2-3 years.
No. The maximum allowable long-term operating temperature of PGH Rexroth Gear Pumps is 80°C. Prolonged use in environments exceeding this temperature will accelerate the aging of internal seals and bearings, significantly reducing the pump's service life and even causing sudden failures.
Người liên hệ: Mr. liyun
Tel: +8615280488899
