|
Product Details:
|
| Drivetype: | Shaft Driven | Warranty: | One Year |
|---|---|---|---|
| Usage: | Oil | Pump Shaft Position: | Horizontal |
| Operatingtemperaturerange: | -20°C To 80°C | Condition: | New |
| Seal Type: | Lip Seal Or Mechanical Seal | ||
| Highlight: | Rexroth directional hydraulic solenoid valve,Rexroth 4WE6D6X hydraulic valve,Rexroth EG24N9K4 solenoid valve |
||
The Rexroth 4WE6C6X/EG24N9K4 is a high-performance directional control valve designed for precision hydraulic applications. Featuring Rexroth's proven "C" spool technology, this valve delivers exceptional flow control and switching reliability in demanding industrial environments.
| Order Number | R900561272 |
|---|---|
| Model | 4WE6C6X/EG24N9K4 |
| Type | 4/3-way directional control valve |
| Operating Principle | Solenoid operated with spring return |
| Voltage Rating | 24 VDC |
| Current Consumption | 0.45A nominal |
| Power Rating | 10.8W |
| Port Size | G1/4" (ISO 228) |
| Mounting Interface | ISO 4401-03-02-0-94 |
| Weight | Approximately 1.8 kg |
| Protection Class | IP65 |
| Maximum Operating Pressure | 315 bar |
|---|---|
| Nominal Flow Rate | 30 L/min |
| Maximum Flow Rate | 60 L/min |
| Response Time | ≤ 25 ms |
| Switching Frequency | Up to 5 Hz |
| Pressure Drop | < 8 bar at nominal flow |
| Hysteresis | < 5% of rated current |
| Operating Temperature Range | -20°C to +80°C |
| Hydraulic Fluid Temperature | -20°C to +80°C |
| Viscosity Range | 10 to 380 mm²/s |
| Spool Type | C (Closed center, all ports blocked in neutral position) |
|---|---|
| Spool Diameter | 6 mm |
| Overlap | Positive |
| Control Edge Geometry | Sharp-edged for precise flow control |
| Leakage Rate | < 30 cm³/min at 100 bar |
| Mounting Torque | 20-25 Nm for mounting bolts |
|---|---|
| Filtration Requirement | 25 μm nominal, 10 μm absolute |
| Fluid Cleanliness | NAS 1638 Class 8 or better |
| Storage Conditions | -20°C to +50°C, <80% humidity |
It is a 4/3-way (4 ports, 3 positions) directional control valve. Its primary function is to precisely control the flow direction to hydraulic actuators (like cylinders or motors) in industrial systems. The "C" spool with a closed center (all ports blocked in neutral) is designed to hold an actuator firmly in position when the valve is not energized.
The valve is rated for a maximum operating pressure of 315 bar and a nominal flow rate of 30 L/min (with a maximum of 60 L/min). It is crucial not to exceed these limits to ensure reliable operation and valve longevity.
The "C" designates the spool type. For this 4/3-way valve, a "C" spool has a closed center in the neutral (de-energized) position. This means all four ports (P-pressure, T-tank, A & B-work) are blocked, which locks the connected actuator in place, preventing it from drifting under load.
The valve requires a 24 VDC power supply, with a nominal current of 0.45A (10.8W). It features a DIN 43650 Form A electrical connector with an M12x1 cable entry. The coil has 100% duty cycle and IP65 protection.
For optimal performance and long service life (>20 million cycles), ensure:
Contact Person: Mr. liyun
Tel: +8615280488899