|
Product Details:
|
| Mountingtype: | Flange Or Foot Mount | Drive Mode: | Mechanically Driven Pump |
|---|---|---|---|
| Rotation: | 0.2-cp Can Be Transported In Reverse | Manufacturer: | Rexroth |
| Operatingtemperaturerange: | -20°C To 80°C | Pumptype: | Variable Displacement / Fixed Displacement |
| Factory: | Manufacturer | ||
| Highlight: | Rexroth proportional pressure relief valve,Rexroth hydraulic valve with warranty,German imported Rexroth relief valve |
||
Rexroth proportional pressure relief valve imported from Germany
| Parameter | Value / Description |
|---|---|
| Product Model | DBET-52/50G24K4V |
| Nominal Pressure Rating | 50 bar (maximum operating pressure at port P) |
| Supply Voltage | 24 V DC (±10%, 21 to 35 V DC permissible range) |
| Electrical Connection | 6-pin plug + PE, compliant with DIN 43563 standard |
| Protection Class | IP65 (dust-tight and protected against water jets) |
| Seal Material | FKM (fluorocarbon rubber, indicated by 'V' suffix) |
The nominal pressure rating is 50 bar, and the maximum flow rate is 2 L/min at this pressure. For optimal performance and longevity, it's recommended to operate within these specified limits.
The valve operates on a 24 V DC power supply (permissible range: 21-35 V DC). The control input accepts an analog 0 to 10 V signal. Electrical connection is via a 6-pin plug with PE, compliant with DIN 43563 standard.
The valve has an IP65 protection class, making it dust-tight and protected against water jets. The ambient temperature range for operation is -20 °C to +50°C.
This model is compatible with mineral-based hydraulic oils (HL, HLP per DIN 51524 standards), with a viscosity range of 10-800 mm²/s. The seal material is FKM (fluorocarbon rubber), indicated by the 'V' suffix in the model number.
The typical response time for a full signal change is less than 70 ms. The hysteresis is typically ≤ 1%, ensuring precise pressure control with minimal deviation between increasing and decreasing pressure cycles.
Contact Person: Mr. liyun
Tel: +8615280488899