A2VK107MAGR1G1PE2-SO2 A2VK107MAGR1G0PE2-SO2 A2VK107MAGR1G0PE1-SO2 Variable displacement piston pump A2VK107 series variable metering pump German Rexroth hydraulic pump

The Rexroth A2VK107 series axial piston variable metering pumps are high-performance hydraulic metering products featuring a displacement of 107 mL/r. Designed for applications requiring large flow capacity and precise metering control, these pumps are ideal for industrial mixing systems, high-flow chemical metering, and large-scale hydraulic power units.

Available models: A2VK107MAGR1G1PE2-SO2, A2VK107MAGR1G0PE2-SO2, A2VK107MAGR1G0PE1-SO2

• Large displacement: 107 mL/r capacity for high-flow applications
• Efficient operation: Optimized flow path design reduces pressure loss
• Stable output: Maintains consistent flow under varying load conditions

• Manual adjustment: Handwheel with scale for accurate flow setting
• Repeatable performance: Consistent metering accuracy across flow range
• Locking mechanism: Handwheel lock to maintain set flow position

• Heavy-duty design: Suitable for continuous operation in demanding environments
• Durable materials: Key components made from wear-resistant materials
• Reliable sealing: Multiple sealing points ensure long-term leak-free operation

• Multiple port options: Different port configurations for various system layouts
• Standard mounting: SAE flange interface for easy installation
• Service-friendly: Modular design simplifies maintenance and part replacement

• Working pressure: Rated 250 bar, peak 315 bar (short-term)
• Displacement range: 0 to 107 mL/r continuously adjustable
• Volumetric efficiency: ≥95% (rated condition)
• Overall efficiency: ≥90% (rated condition)
• Allowable inlet pressure: 0.1-0.3 MPa for open circuit

• Mounting position: Any position, handwheel shaft horizontal recommended
• Coupling requirement: Shaft alignment error ≤0.1mm
• Inlet line: Recommended hose inner diameter ≥16mm
• Drain line: Separate connection to tank, back pressure ≤0.2 MPa

• Hydraulic oil: Recommended ISO VG 46 or VG 68
• Filtration: 10-20μm at inlet
• Oil temperature: Normal 15-60°C, max 80°C
• First start: Pre-fill pump with oil before operation

• Industrial Mixing Systems: Large-scale chemical mixing equipment, high-flow metering and batching systems, continuous process production lines
• Hydraulic Power Units: Large hydraulic systems requiring high flow, multiple actuator control systems, industrial machinery hydraulic power sources
• Special Applications: High-flow fluid transfer systems, large volume metering applications, systems requiring 100+ mL/r pump capacity

The three models share the same 107 mL/r displacement and right-hand rotation. The differences lie in port configurations (G1PE2, G0PE2, G0PE1) which affect connection types and system integration options. Selection should be based on your system's connection requirements and available space.

Required motor power depends on operating pressure and flow rate. For typical operation at 250 bar and maximum flow, a motor of approximately 30-40 kW is recommended. Actual power requirement should be calculated based on your specific system pressure and flow requirements.

For 107 mL/r pumps, ensure adequate inlet line size (minimum 16mm ID recommended) to avoid cavitation. Suction line should be as short and straight as possible. Consider using a larger reservoir to maintain proper oil level and cooling.

Regular maintenance includes checking oil level and quality, inspecting for leaks, and monitoring pump noise and temperature. Due to higher flow rates, oil filtration becomes more critical - check and replace filters more frequently.

Standard models are designed for mineral-based hydraulic oils. For water-based fluids (HFA, HFB, HFC), special materials and seals may be required. Consult with technical support before using with non-standard media.

• Warranty period: 12 months from date of shipment
• Technical support: Application consultation, installation guidance, troubleshooting
• Spare parts: Available through authorized distributors
• Repair service: Authorized service network available

For ordering or technical specifications, contact your local Rexroth authorized distributor or sales representative. Provide complete model number, quantity, and delivery requirements.