|
Product Details:
|
| Pressurerating: | Up To 350 Bar | Inlet Connection: | Threaded Or Flanged |
|---|---|---|---|
| Shafttype: | Splined / Keyed | Weight: | Varies By Model, Approx. 10-30 Kg |
| Pump: | Rexroth | Operatingtemperaturerange: | -20°C To 80°C |
| Displacement: | 10 To 250 Cc/rev | Pressure: | High Pressure |
| Transport Package: | Wooden Box | ||
| Highlight: | Rexroth PV7 vane pump,original imported hydraulic pump,pilot-operated vane pump Germany |
||
PV7-1X/25-30RE01KD0-16, PV7-1X/10-14RE01MC5-16, PV7-1X/10-20RE01MC0-10
Made in Germany, Rexroth original imported hydraulic pump
| Parameter | Specification |
|---|---|
| Model Series | PV7-1X/10-14RE01MC0-16, PV7-1X/16-20RE01MC0-16, PV7-2X/20-25RE01MC0-16 (typical models) |
| Displacement per Revolution | 10-25 cm³/rev (varies by specific model) |
| Maximum Operating Pressure | 210 bar (continuous), 250 bar (peak) |
| Maximum Speed | 1800-3600 rpm (depends on displacement and fluid viscosity) |
| Minimum Speed | 600 rpm (ensures stable operation) |
| Fluid Medium | Mineral oil-based hydraulic fluid (ISO VG 32/46/68 recommended) |
| Fluid Temperature Range | -20 °C to +80 °C (operation); -40 °C to +90 °C (storage) |
| Viscosity Range | 10-1000 mm²/s (operation); 2-1500 mm²/s (start-up) |
| Volumetric Efficiency | ≥90% (at rated pressure and speed) |
| Total Efficiency | ≥80% (at rated working condition) |
| Noise Level | ≤65 dB(A) (at 1 m distance under rated operation) |
| Suction Pressure | -0.8 bar to +1 bar (absolute pressure: 0.2-1.1 bar) |
| Mounting Type | Flange mounting (ISO 3019-2 standard), foot mounting (optional) |
| Shaft Connection | Splined shaft (ISO 4162 standard) or keyed shaft (customizable) |
It is equipped with a pressure relief valve to protect the entire hydraulic system from overpressure damage.
Yes, it works stably in both intermittent and continuous operation modes.
Yes, it is widely used in material handling equipment hydraulic systems due to its reliability.
It has low wear and tear, which helps reduce the replacement costs of components.
No, thanks to its good self-priming capability, it can start quickly without complex procedures.
Contact Person: Mr. liyun
Tel: +8615280488899