|
Product Details:
|
| Drive Mode: | Mechanically Driven Pump | Maximum Speed: | 1800 Rpm |
|---|---|---|---|
| Pump: | Piston | Maximum Pressure: | 280 Bar |
| Displacement: | 28-140 Cc/rev | Shaft Type: | Splined Shaft |
| Products Name: | Rexroth Hydraulic Piston Pump | Certifisaarion: | ISO9001 |
| Charging: | Micro5p | ||
| Highlight: | Rexroth proportional hydraulic valve,German imported directional valve,original packaging hydraulic valve |
||
4WRZ10E3-85-7X/6EG24N9EK4/M
4WRZ10E3-85-7X/6EG24N9K4/D3M
4WRZ10E3-85-7X/6EG24N9K4/M
| Attribute | Value |
|---|---|
| Brand | REXROTH |
| Type | Proportional valve |
| Material | Cast steel |
| Scope of Application | Hydraulic system |
| Applicable Medium | Oil products |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation Type | Threaded installation |
| Type (channel location) | Straight through type |
4WRZ10E85-70/6EG24N9TK4/D3M
4WRZ10E85-70/6EG24N9TK4/M
4WRZ10E85-70/6EG24N9ETK4/D3M
4WRZ10E85-70/6EG24N9ETK4/M
4WRZ10E85-70/6EG24N9EK4/D3M
4WRZ10E85-70/6EG24N9EK4/M
4WRZ10E85-70/6EG24N9K4/D3M
4WRZ10E3-50-70/6EG24N9K4/M
4WRZ10E50-70/6EG24N9TK4/D3M
4WRZ10E50-70/6EG24N9ETK4/D3M
4WRZ10E50-70/6EG24N9ETK4/M
4WRZ10E50-70/6EG24N9EK4/D3M
4WRZ10E50-70/6EG24N9EK4/M
4WRZ10E50-70/6EG24N9K4/D3M
4WRZ10E50-70/6EG24N9K4/M
4WRZ10E25-70/6EG24N9EK4/M
4WRZ10E25-70/6EG24N9K4/D3M
h4WRZ10E25-70/6EG24N9K4/M
4WRZ10W6A85-7X/6EG24N9K4/D3M
4WRZ10W6A50-7X/6EG24N9K4/M
4WRZ10W6A25-7X/6EG24N9K4/M
4WRZ10EA50-7X/6EG24N9K4/M
4WRZ10W9-85-7X/6EG24N9K4/D3M
4WRZ10EA25-7X/6EG24N9K4/M
4WRZ10W9-85-7X/6EG24N9EK4/M
4WRZ10W9-85-7X/6EG24N9K4/M
4WRZ10W9-50-7X/6EG24N9EK4/M
4WRZ10W9-50-7X/6EG24N9K4/D3M
4WRZ10W9-50-7X/6EG24N9K4/M
4WRZ10W9-25-7X/6EG24N9EK4/M
4WRZ10W9-25-7X/6EG24N9K4/D3M
4WRZ10W9-25-7X/6EG24N9K4/M
A: Common neutral positions include: closed center (P, A, B blocked, T open), open center (P connected to T, A/B blocked), or tandem center (A connected to B, P connected to T).
A: Adjust the input electrical signal (increase/decrease current/voltage) or use the built-in flow adjustment screw (if equipped) for fine-tuning.
A: While primarily a directional/flow control valve, some models integrate pressure relief functions or can be paired with pressure compensators for pressure regulation.
A: The 4WRZE10 adds an integrated electronic amplifier, while the 4WRZ10 requires an external amplifier for proportional control.
A: Connect the spool position feedback signal to a controller (e.g., PLC, motion controller), which adjusts the input signal based on the desired vs. actual position.
Contact Person: Mr. liyun
Tel: +8615280488899