Rexroth German High Pressure Hydraulic Gear Pump with 280 Bar and 3 Speed Settings and One Year Warranty

PGH5-2X/160RE07VU2 PGH5-2X/125LR11VU2 PGH5-3X/080RE11VU2 PGH3-2X/013RR07VU2 PGH3-2X/016RE07VU2 High pressure gear pump quantitative Rexroth German hydraulic pump

• Maximum working pressure: 350 bar
• Maximum displacement: 6-250cm3
• Low operating noise and minimal vibration
• Sealing gap compensation enables efficient operation even at low speeds and low viscosities
• Suitable for various speeds and viscosity ranges
• All installation and rated size components can be connected
• Can be connected and used with vane pumps and axial piston pumps

• Overheating: Ensure the fluid viscosity is correct, the system cooler is functioning, and the pump is not overloaded. Check for restrictions in the discharge line.
• Noise/Vibration: This can indicate cavitation (check suction side), air in the fluid (bleed the system), mechanical wear in bearings or gears, or misalignment between the pump and drive motor. Correct the alignment if necessary.

• Regular Inspection: Perform visual checks for leaks, unusual noises, and overheating.
• Fluid Maintenance: Use clean, recommended fluid and monitor its condition. Regularly check and replace suction and pressure filters.
• Lubrication: Ensure bearings are properly lubricated according to manufacturer specifications.
• Seal and Connection Check: Inspect shaft seals and pipe connections for leaks and tighten or replace them as needed.
• Alignment Check: Periodically verify the alignment between the pump and the drive motor.