|
Detalhes do produto:
|
| Uso: | Óleo, bomba de pistão hidráulico | Aplicação: | Contadores, Outros, Sistemas hidráulicos, bombas hidráulicas, escavadeiras |
|---|---|---|---|
| Estrutura: | Bomba de pistão, bomba de engrenagem, bomba de estágio único, bombas hidráulicas | Nome do produto: | Bombas hidráulicas, bomba de engrenagem hidráulica Rexroth genuína, bomba de palhetas Vickers |
| Garantia: | 1 ano, 6 meses-12 meses, 12 meses, um ano, 3 meses ou 1 ano | Nome: | Bomba de pistão Rexroth, bomba 90R100, peças de bomba de escavadeira bombas hidráulicas de bomba rex |
| Origem: | Shandong, China, bomba de engrenagem Rexroth 100% original | ||
| Destacar: | Rexroth hydraulic proportional valve,German made electro-hydraulic valve,Rexroth directional valve with warranty |
||
Original imported German made Rexroth hydraulic proportional electro-hydraulic directional valve
| Selection Dimension | Specific Parameters/Options | Description |
|---|---|---|
| Model Designation | 4WRE | Basic model: Direct-acting proportional directional valve with electrical position feedback and no integrated electronics (OBE) |
| Integrated Electronics (OBE) | No Code | Standard configuration without integrated electronics; external amplifier required (to be ordered separately) |
| Nominal Size | 6 | Core size with component series 2X; mounting dimensions comply with Series 20-29 standards |
| Valve Core Type | 4/2 (2-position 4-way), 4/3 (3-position 4-way) | 4/3 type features spring-centered spool for automatic reset when de-energized; suitable for different oil circuit directional control needs |
| Rated Flow (Δp=10bar) | 4L/min (Code 04), 8L/min (Code 08), 16L/min (Code 16), 32L/min (Code 32) | Flow rates distinguished by corresponding codes; matched to hydraulic system flow requirements |
| Seal Material | V (FKM Fluororubber) | Default FKM material; compatible with mineral oil and other hydraulic fluids to ensure sealing performance |
| Power Supply Voltage | G24 (DC 24V) | Suitable for industrial standard DC power supply; meets proportional solenoid drive requirements |
| Electrical Interface | A1 (±10V Voltage Input), F1 (4-20mA Current Input) | Two interface options available; compatible with PLCs, computers, and other control signal sources |
| Electrical Connection | K4 (No Plug) | Plug compliant with DIN EN 175301-803 standard required (to be ordered separately) |
| Special Protection | J (Seawater-Resistant) | Only available for Size 6; suitable for marine-related or humid/corrosive working conditions |
| Mounting Standard | ISO 4401 | Panel mounting with standard mounting hole pattern; compatible with universal hydraulic system manifold layouts |
| Maximum Working Pressure | 315bar | Suitable for most medium-to-high pressure industrial hydraulic scenarios (e.g., hydraulic actuators in machine tools, automated production lines) |
Typical response time (rise time from 10% to 90% of full flow) is 15-30 ms for NG 6-10 models and 30-50 ms for larger NG 16-25 models.
Yes, most models are equipped with a manual override (screwdriver or lever type) to actuate the valve mechanically during emergencies.
The integrated electronics provide signal amplification, current limiting, short-circuit protection, and diagnostic functions to optimize valve performance and reliability.
Common causes include: no power supply to the solenoid, damaged wiring, incorrect control signal (e.g., 0-5 V instead of 0-10 V), or a faulty solenoid coil. Check wiring continuity and signal levels first.
Drain port leakage may result from excessive backpressure (exceeding 5 bar), worn seal rings, or internal spool damage. Ensure the drain line is unobstructed and check seal integrity.
Pessoa de Contato: Mr. liyun
Telefone: +8615280488899