|
Szczegóły Produktu:
|
| Kolor: | Czarny, na życzenie klienta, naturalny, czarny lub według potrzeb, dostosuj | Tworzywo: | Żeliwo, stal nierdzewna, żeliwo / stal / brąz / żeliwo sferoidalne i tak dalej |
|---|---|---|---|
| Nazwa produktu: | Pompy hydrauliczne, oryginalna hydrauliczna pompa zębata Rexroth, pompa łopatkowa Vickersa | Gwarancja: | 1 rok, 6 miesięcy-12 miesięcy, 12 miesięcy, jeden rok, 3 miesiące lub 1 rok |
| Stan: | 100% nowa, nowa pompa Rexroth, nowa i oryginalna OEM, Oringal nowa, trwała | Funkcja: | Wysoka wydajność, długie życie |
| Nazwa: | Pompa tłokowa Rexroth, pompa 90R100, części pompy koparki pompy hydrauliczne Rexroth | ||
| Podkreślić: | Rexroth hydraulic proportional valve,German Rexroth solenoid valve,Rexroth directional valve with warranty |
||
4WREE6WA16-2X/G24K31/F1V
4WREE10E25-2X/G24K31/A1V
4WREE6W08-2X/G24K31/F1V
| Attribute | Value |
|---|---|
| Processing & Customization | Yes |
| Type | Proportional valve |
| Material | Cast steel |
| Brand | REXROTH |
| Scope of Application | Hydraulic system |
| Product Alias | Proportional directional valve |
| Applicable Medium | Oil products |
| Applicable Temperature | Normal temperature (℃) |
| Nominal Pressure | Normal pressure (MPa) |
| Nominal Diameter | 6-way diameter (mm) |
| Installation type | Threaded installation |
| Operating Temperature | Room temperature |
| Type (channel location) | Straight through type |
Most 4WREE models comply with ISO 4401 (CETOP RP 121 H) mounting dimensions, ensuring interchangeability with other standard valves.
While vertical mounting is recommended for optimal performance, valves can be mounted horizontally with minimal impact, provided the solenoid coils are not exposed to direct moisture or extreme temperatures.
Follow Rexroth's specifications: M10 bolts require 25-30 Nm, M12 bolts require 45-55 Nm, and M16 bolts require 90-110 Nm (always use thread lock if specified).
Use alignment pins (where provided) and ensure the valve flange is clean and flat; misalignment exceeding 0.1 mm may cause leakage or reduced performance.
Yes, a relief valve must be installed in the system to protect the valve and hydraulic components from overpressure, set to 10-15% above the maximum operating pressure of the 4WREE.
Osoba kontaktowa: Mr. liyun
Tel: +8615280488899
