|
제품 상세 정보:
|
| 주변 온도: | -20°C ~ +60°C | 장착 인터페이스: | ISO 4401-05-04-0-05(CETOP 5, NG10 서브플레이트) |
|---|---|---|---|
| 전기 커넥터: | EN 175201-804에 따른 7핀(6+PE) 원형 커넥터 | 씰 재질: | NBR(M) |
| 수동 재정의: | 아니요 |
|
Parameter |
Specification |
|---|---|
|
Order Number |
R901507310 |
|
Model |
4WRPEH10C3B100L-3X/M/24F1 |
|
Type |
Direct-operated, high-response proportional directional valve (with integrated electronics, OBE) |
|
Function |
4/3-way (4 ports, 3 positions) |
|
Spool Type |
C3 (Zero overlap, servo-type) with inductive position transducer (LVDT) |
|
Nominal Size |
NG10 (CETOP 5, Size 10) |
|
Max. Operating Pressure |
P, A, B: 350 bar |
|
Rated Flow |
100 L/min (at Δp = 70 bar for the valve) |
|
Max. Flow |
Approx. 100–120 L/min |
|
Electronics |
Integrated On-Board Electronics (OBE), no external amplifier required |
|
Supply Voltage |
24V DC (G24) |
|
Control Signal |
4...20 mA (F1, analog current input) |
|
Feedback Signal |
Spool position feedback (LVDT) |
|
Manual Override |
No |
|
Seal Material |
NBR (M) |
|
Electrical Connector |
7-pin (6+PE) round connector per EN 175201-804 |
|
Mounting Interface |
ISO 4401-05-04-0-05 (CETOP 5, NG10 subplate) |
|
Suitable Media |
Mineral oils (HL, HLP), HFC, HFD, biodegradable oils |
|
Media Temperature |
-20°C to +80°C |
|
Viscosity Range |
10 to 800 mm²/s (recommended 20–100 mm²/s) |
|
Ambient Temperature |
-20°C to +60°C |
|
Protection Rating |
IP65 (when electrical plug connected) |
|
Weight |
Approx. 6.7 kg |
| R901382510 4WRPEH6C5B24L-3X/M/24F1 |
| R901382511 4WRPEH6C3B15P-3X/M/24F1 |
| R901382512 4WRPEH6C4B40P-3X/M/24F1 |
| R901382513 4WRPEH6C3B12L-3X/V/24F1 |
| R901382514 4WRPEH6C3B04L-3X/V/24F1 |
| R901382515 4WRPEH6C5B04L-3X/M/24F1 |
| R901382516 4WRPEH6C3B40L-3X/V/24F1 |
| R901382517 4WRPEH6C5B12L-3X/M/24F1 |
| R901382519 4WRPEH6C5B12L-3X/M/24A1 |
| R901382520 4WRPEH6CB02L-3X/M/24A1 |
| R901382521 4WRPEH6C4B15P-3X/M/24F1 |
| R901382522 4WRPEH6C3B15P-3X/V/24A1 |
| R901382523 4WRPEH6C4B24L-3X/V/24F1 |
| R901382524 4WRPEH6C5B04L-3X/M/24A1 |
| R901382525 4WRPEH6C4B02L-3X/V/24F1 |
| R901382526 4WRPEH6CB24L-3X/V/24F1 |
| R901382527 4WRPEH6C1B24L-3X/M/24A1 |
| R901382528 4WRPEH6C4B04L-3X/V/24F1 |
| R901382530 4WRPEH6CB15P-3X/M/24A1 |
| R901382532 4WRPEH6C4B25P-3X/M/24F1 |
| R901382533 4WRPEH6C4B04P-3X/M/24A1 |
| R901382534 4WRPEH6C5B40L-3X/V/24F1 |
| R901382535 4WRPEH6C3B25P-3X/M/24F1 |
| R901382537 4WRPEH6C3B04P-3X/V/24F1 |
| R901382538 4WRPEH6C1B12L-3X/M/24A1 |
| R901382539 4WRPEH6C3B40P-3X/M/24F1 |
| R901382630 4WRPEH6CB40P-3X/M/24A1 |
| R901383468 4WRPEH6C4B12L-2X/G24K0/F1V |
| R901387787 4WRPEH6CB04L-2X/G24K0/C6V |
| R901387788 4WRPEH6C4B40L-2X/G24K0/C6V |
| R901396859 4WRPEH6C3B08L-3X/M/24A1 |
| R901396969 4WRPEH6C3B04L-3X/M/24F1-885 |
| R901402614 4WRPEH6C3B24L-3X/G24K0/A1M=KM |
| R901402817 4WRPEH6C3B24L-2X/G24K0/A1M=KM |
| R901408241 4WRPEH6C5B24L-3X/V/24A1 |
| R901409296 4WRPEH6C3B02L-2X/G24K0/A1M-816=KM |
| R901410492 4WRPEH6C3B40L-3X/M/24A1-15 |
| R901412522 4WRPEH6C4B12L-3X/M/24A1-561 |
| R901422942 4WRPEH6CB40L-3X/V/24F1 |
FAQ:
Spool Type (C3)
The C3 spool is a zero-overlap (critical center) spool with servo-valve quality. This design provides high linearity and fast response, ideal for closed-loop control applications. The "B100L" indicates a specific flow gain characteristic (100 L/min with linear characteristic "L").
Control & Feedback (/24F1)
The suffix /F1 indicates a 4...20 mA current input for the command signal. The valve features integrated LVDT position feedback, enabling full closed-loop control of the spool position. It has integrated on-board electronics (OBE), so it does not require an external amplifier.
High Dynamic Performance
As a direct-acting valve with integrated electronics, the 4WRPEH series offers high frequency response and fast step response. It is suitable for applications requiring servo-like performance with the robustness of a proportional valve.
Fail-Safe Behavior
This valve is single-side actuated (single proportional solenoid with spring return). In the event of power failure or signal loss (current < 4 mA), the spring returns the spool to a defined 4/4 fail-safe position (typically all ports blocked).
Critical Installation Notes
Cleanliness: Maintain high oil cleanliness (recommended ISO 4406 18/16/13 or better) due to the sensitive servo-type spool and sleeve assembly.
Current Signal: The /F1 version uses a 4...20 mA current signal, which is less susceptible to noise interference over long cable runs compared to voltage signals.
Mounting: Use the correct ISO 4401-05 (NG10) subplate to ensure proper port alignment and sealing.
담당자: Mr. liyun
전화 번호: +8615280488899
Korean
