|
제품 상세 정보:
|
| 어플리케이션: | 계량, 기타, 유압 시스템, 유압 펌프, 굴착기 | 압력: | 고압, 저압, 기타 |
|---|---|---|---|
| 유형: | 유압 동력 장치,A8VO55/80/107/160,유압 펌프 Rexroth,A8VO80LA1KH1/63R1 | 이름: | 렉스로스 피스톤 펌프, 90R100 펌프, 굴삭기 펌프 부품 렉스로스 펌프 유압 펌프 |
| 기원: | 산동, 중국, 100% 오리지널 렉스로스 기어 펌프 | ||
| 강조하다: | Rexroth hydraulic directional valve,German made proportional solenoid valve,Rexroth hydraulic valve with warranty |
||
| Complete Model Example | Model Code Breakdown | Core Configuration Parameters | Release Status |
|---|---|---|---|
| 4WRE 6 E04-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 04: Rated Flow 4L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 4L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E08-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 08: Rated Flow 8L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 8L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E16-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 16: Rated Flow 16L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 16L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E32-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 32: Rated Flow 32L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 32L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
Connect a flow meter or pressure gauge to the valve's output, apply the minimum (4 mA/0 V) and maximum (20 mA/10 V) control signals, and adjust the zero and span potentiometers (on the amplifier) to match the desired flow/pressure.
Calibrate annually (or 2000 operating hours) to maintain precision, or if performance degradation is detected (e.g., inconsistent flow).
On-site calibration is possible with standard test equipment; factory calibration is recommended for critical applications requiring high accuracy.
Install a surge suppressor or accumulator in the system to absorb pressure spikes (limit spikes to ≤110% of the valve's maximum operating pressure).
Marine-grade models (with corrosion-resistant coatings) are available for saltwater environments; ensure compliance with marine safety standards (e.g., DNV GL).
담당자: Mr. liyun
전화 번호: +8615280488899
