Rexroth Hydraulic Piston Pump 280 bar Max Pressure G1/2 Inlet

Oil Types: Recommended fluids include:

• Mineral oils (RC 90220)
• Environmentally friendly fluids (RC 90221)
• HF fluids (HFA, HFB, HFC - check seal compatibility, typically FKM for HFD; RC 90223)

Specify the fluid type when ordering.

Viscosity Range: The optimal operating viscosity range (at operating temperature) is 16 to 36 mm²/s. Absolute limits are:

• Minimum: 10 mm²/s (short-term, max. case drain temp 90°C)
• Maximum: 1000 mm²/s (short-term, cold start)

Selection: Select a viscosity grade (e.g., VG 46, VG 68) so that the viscosity at the operating temperature falls within the optimal range. Generally, opting for a higher viscosity grade is advised.

To ensure reliable operation and long service life, the oil cleanliness should be at least:

• NAS 1638 Class 9
• ISO/DIS 4406 18/15

Common causes for excessive heating include:

• Internal Leakage: Excessive internal leakage within the pump components converts hydraulic energy to heat
• Mechanical Friction: Dry or semi-dry friction due to worn parts or inadequate lubrication generates heat
• Fluid Friction: Inadequate tank capacity or cooling, causing the system to overheat
• Clogged Return Line Filter: A blocked return filter creates high backpressure, leading to increased temperature
• Low Oil Level: Insufficient oil in the reservoir reduces cooling capacity