|
उत्पाद विवरण:
|
| आदेश संख्या: | 0811404033 | मॉडल: | 4WRPH6C3B04L-2X/G24Z4/M |
|---|---|---|---|
| समारोह: | 4/3-रास्ता (4 पोर्ट, 3 पद) | स्पूल प्रकार: | C3 (शून्य ओवरलैप, सर्वो-प्रकार) आगमनात्मक स्थिति ट्रांसड्यूसर (LVDT) के साथ |
| नाममात्र का आकार: | एनजी6 (सीईटॉप 3) |
|
Parameter |
Specification |
|---|---|
|
Order Number |
0811404033 |
|
Model |
4WRPH6C3B04L-2X/G24Z4/M |
|
Type |
Direct-acting, high-response proportional directional valve (servo-proportional performance) |
|
Function |
4/3-way (4 ports, 3 positions) |
|
Spool Type |
C3 (Zero overlap, servo-type) with inductive position transducer (LVDT) |
|
Nominal Size |
NG6 (CETOP 3) |
|
Max. Operating Pressure |
P, A, B: 315 bar |
|
Rated Flow |
40 L/min (at Δp = 70 bar for the valve) |
|
Max. Flow |
Approx. 40 L/min (nominal) |
|
Electronics |
Integrated On-Board Electronics (OBE) |
|
Supply Voltage |
24V DC (18...30 VDC, /G24) |
|
Control Signal |
±10 V DC (Differential input, /Z4) |
|
Feedback Signal |
Spool position feedback (LVDT) |
|
Manual Override |
No |
|
Seal Material |
NBR (M) |
|
Electrical Connector |
6-pin + PE (DIN 43560-AM2) |
|
Mounting Interface |
ISO 4401-03-02-0-94 (CETOP 3 subplate) |
|
Suitable Media |
Mineral oils (HL, HLP), HFC, HFD, biodegradable oils |
|
Media Temperature |
-20°C to +80°C |
|
Viscosity Range |
10 to 800 mm²/s (recommended 20–100 mm²/s) |
|
Ambient Temperature |
-20°C to +50°C |
|
Weight |
Approx. 2.3 kg |
| 0811 402 016 DBETX-1X/315G24-8NZ4M |
| 0811 402 017 DBETX-1X/180G24-8NZ4M |
| 0811 402 055 DRE6X-1X/175MG24-8NZ4M |
| 0811 402 072 DBETBEX-1X/80G24K31A1M |
| 0811 402 071 DBETBEX-1X/180G24K31A1M |
| 0811 402 003 DBETBX-1X/180G24-37Z4M |
| R900962405 4WREE10W1-25-2X/G24K31/F1V |
| R900933077 4WREE10W1-50-2X/G24K31/A1V |
| R901154931 4WREE10W1-50-2X/G24K31/A1V-280 |
| R900965185 4WREE10W1-50-2X/G24K31/F1V |
| R900927234 4WREE10W1-75-2X/G24K31/A1V |
| R901154933 4WREE10W1-75-2X/G24K31/A1V-280 |
| R900976119 4WREE10W1-75-2X/G24K31/F1V |
| R900933074 4WREE10W25-2X/G24K31/A1V |
| R901127151 4WREE10W25-2X/G24K31/A1V-280 |
| R900953102 4WREE10W25-2X/G24K31/F1V |
| R900969321 4WREE10W3-75-2X/G24K31/A1V |
| R900931371 4WREE10W50-2X/G24K31/A1V |
| R900974227 4WREE10W50-2X/G24K31/A1V-280 |
| R900920567 4WREE6E16-2X/G24K31/A1V |
| R900950342 4WREE6E16-2X/G24K31/A1V-655 |
| R900941623 4WREE6E16-2X/G24K31/F1V |
| R900907114 4WREE6E32-2X/G24K31/A1V |
| R900974914 4WREE6E32-2X/G24K31/A1V-280 |
| R900962181 4WREE6E32-2X/G24K31/A1V-655 |
| R900925733 4WREE6E32-2X/G24K31/F1V |
| R900706670 4WREE6E3-32-2X/G24K31/A1V |
| R900950317 4WREE6EA08-2X/G24K31/A1V |
| R900913433 4WREE6EA16-2X/G24K31/A1V |
| R900973289 4WREE6EA16-2X/G24K31/F1V |
| R900912521 4WREE6EA32-2X/G24K31/A1V |
| R900929889 4WREE6EA32-2X/G24K31/F1V |
| R901161258 4WREE 6 E32-2X/G24K31/A1V-204 |
| R900927230 4WREE10E75-2X/G24K31/A1V |
FAQ:
Spool Type (C3)
The C3 spool is a zero-overlap (critical center) spool with servo-valve quality. This design provides high linearity and fast response, ideal for closed-loop control applications. The "B04L" indicates a specific flow gain characteristic (04 size with linear characteristic "L").
Control & Feedback (/Z4)
The /Z4 suffix indicates a differential ±10 V DC voltage input for the command signal. The valve features integrated LVDT position feedback, enabling full closed-loop control of the spool position without requiring an external amplifier card.
High Dynamic Performance
As a direct-acting valve with integrated electronics, the 4WRPH series offers high frequency response (typically > 100 Hz) and fast step response. It is suitable for applications requiring servo-like performance with the robustness of a proportional valve.
Fail-Safe Behavior
This valve is single-side actuated (single proportional solenoid with spring return). In the event of power failure, the spring returns the spool to a defined 4/4 fail-safe position (typically all ports blocked or P to B, A to T, depending on spool configuration).
Critical Installation Notes
Cleanliness: Maintain high oil cleanliness (recommended ISO 4406 18/16/13 or better) due to the sensitive servo-type spool and sleeve assembly.
Voltage Supply: Ensure a stable 24V DC supply (18...30 VDC) with low ripple to avoid noise in the control signal.
Mounting: Use the correct ISO 4401-03 subplate to ensure proper port alignment and sealing.
व्यक्ति से संपर्क करें: Mr. liyun
दूरभाष: +8615280488899
Hindi
